On Fri, Aug 17, 2018 at 10:22:09AM -0700, J. Liles wrote: > I would double-check your /etc/hosts file and other DNS config. I suspect > that 'localhost' is either resolving to the old address or not resolving at > all.
That was it. Forgot to change the IP address in /etc/hosts. Thanks for the quick reply and sorry for the noise. J > In order for liblo (OSC) to function localhost must result to either > the loopback address (127.0.0.1) or the correct IP address. > > If you're talking about a multi-machine setup, that could present an an > entirely different set of problems. > > > On Fri, Aug 17, 2018 at 9:59 AM John Rigg <[email protected]> wrote: > > > > > I just hit a minor problem with NSM and IP addresses. Normally > > my DAWs use a 192.168.0.x IP address on eth0 and NSM works > > fine. I had to change it to 192.168.1.x to connect to a > > local studio network, and NSM wouldn't work with that (no > > sessions visible, toolbar commands greyed out). > > > > It's possible to work around in this instance by changing > > back to 192.168.0.x when I need to use NSM, but is this > > expected behaviour? > > > > John > > > > > >
