github-actions[bot] commented on PR #5953: URL: https://github.com/apache/texera/pull/5953#issuecomment-4806452391
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 6 worse · ⚪ 7 noise (<±5%) · 0 without baseline > Compared against main `2ebfc28` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/28217673392) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 404 | 0.247 | 24,317/37,174/37,174 us | 🔴 +25.5% / 🔴 +149.7% | | 🔴 | bs=100 sw=10 sl=64 | 830 | 0.506 | 121,807/128,844/128,844 us | 🟢 -9.7% / 🔴 +22.2% | | ⚪ | bs=1000 sw=10 sl=64 | 955 | 0.583 | 1,045,904/1,077,268/1,077,268 us | ⚪ within ±5% / 🔴 -7.8% | <details><summary>Baseline details</summary> Latest main `2ebfc28` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 404 tuples/sec | 455 tuples/sec | 781.13 tuples/sec | -11.2% | -48.3% | | bs=10 sw=10 sl=64 | MB/s | 0.247 MB/s | 0.278 MB/s | 0.477 MB/s | -11.2% | -48.2% | | bs=10 sw=10 sl=64 | p50 | 24,317 us | 20,236 us | 12,542 us | +20.2% | +93.9% | | bs=10 sw=10 sl=64 | p95 | 37,174 us | 29,614 us | 14,886 us | +25.5% | +149.7% | | bs=10 sw=10 sl=64 | p99 | 37,174 us | 29,614 us | 17,580 us | +25.5% | +111.4% | | bs=100 sw=10 sl=64 | throughput | 830 tuples/sec | 854 tuples/sec | 999.37 tuples/sec | -2.8% | -16.9% | | bs=100 sw=10 sl=64 | MB/s | 0.506 MB/s | 0.521 MB/s | 0.61 MB/s | -2.9% | -17.0% | | bs=100 sw=10 sl=64 | p50 | 121,807 us | 114,912 us | 99,687 us | +6.0% | +22.2% | | bs=100 sw=10 sl=64 | p95 | 128,844 us | 142,629 us | 106,271 us | -9.7% | +21.2% | | bs=100 sw=10 sl=64 | p99 | 128,844 us | 142,629 us | 115,445 us | -9.7% | +11.6% | | bs=1000 sw=10 sl=64 | throughput | 955 tuples/sec | 953 tuples/sec | 1,036 tuples/sec | +0.2% | -7.8% | | bs=1000 sw=10 sl=64 | MB/s | 0.583 MB/s | 0.582 MB/s | 0.632 MB/s | +0.2% | -7.8% | | bs=1000 sw=10 sl=64 | p50 | 1,045,904 us | 1,047,862 us | 970,675 us | -0.2% | +7.8% | | bs=1000 sw=10 sl=64 | p95 | 1,077,268 us | 1,096,957 us | 1,011,928 us | -1.8% | +6.5% | | bs=1000 sw=10 sl=64 | p99 | 1,077,268 us | 1,096,957 us | 1,045,045 us | -1.8% | +3.1% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,495.16,200,128000,404,0.247,24317.15,37173.73,37173.73 1,100,10,64,20,2410.35,2000,1280000,830,0.506,121806.51,128843.81,128843.81 2,1000,10,64,20,20948.17,20000,12800000,955,0.583,1045904.19,1077268.43,1077268.43 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
