On Tue, 28 Sep 2010 18:17:25 +0200 Grzesiek Sójka <p...@pfu.pl> wrote:
> I'm completely lost at the moment so let me start from the > beginning. First thing is that everything works fine with Nvidia > binary drivers, which means that hardware is rather OK. After > loading of the nouveau.ko the monitor connected to DVI-I-1 goes > to the standby mode. I do not know if the head is turned of or > maybe some kind of rates are too high/low. I was trying to play > with video=DVI-I-1: with different modes and switches (M/R/D/e) > and nothing. At the some time (after loading nouveau.ko) the > monitor connected with the DVI-I-2 starts to blink. And again I > was playing with the video=DVI-I-2:??? and nothing. I thought > that maybe after starting the xorg I will get the proper image at > both monitor. Unfortunately - no success. According to the Xorg > log file (Option "ModeDebug" "true") all the refresh rates are > ok. Moreover I was trying to use different ModeLines and nothing. > The X server claims that there are two monitor connected and > working but the first one is in standby mode and the second is > blinking. Any ideas?? If you need some more information please > let me know. Yes, the complete kernel and X logs, like I have requested twice before. That is the minimum before anyone will seriously start looking into it. Preferrably, use the simplest setup that fails: - only one monitor physically connected - the following xorg.conf: Section "Device" Identifier "n" Driver "nouveau" Option "ModeDebug" "true" EndSection Thanks. -- Pekka Paalanen http://www.iki.fi/pq/ _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau