Yes I still have problems
On Thu, 26 Apr 2012 15:03:12 -0700
Weiyang Mo <[email protected]> wrote:
Hi, just use the following command:
cd nox
sudo ./boot.sh
sudo mkdir build/
cd build/
sudo ../configure
sudo make
cd src
sudo make check
Then
cd nox/build/src
sudo ./nox_core --version
If you already changed to destiny branch. You'll get the
following: NOX
0.9.1~full~beta(nox_core)
Best
Weiyang
2012/4/26 Elias Marti Paz-Rudolph <[email protected]>
I have checked out Destiny however i dont know which
install file you are
reffering to
Eias
On Wed, 25 Apr 2012 21:10:03 -0700
Weiyang Mo <[email protected]> wrote:
Have you checked the NOX to destiny branch? It is Zaku
by default.
To do this
cd nox
git checkout destiny
Then repeat each step referring to INSTALL file.
Best
Weiyang
2012/4/25 Elias Paz <[email protected]>
Yes all dependencies are installed****
** **
*From:* Weiyang Mo
[mailto:moweiyang1988@gmail.**com<[email protected]>
]
*Sent:* Wednesday, April 25, 2012 8:05 PM
*To:* Elias Paz
*Cc:* [email protected]
*Subject:* Re: [nox-dev] NOX GUI****
** **
So have you already installed all the dependencies
mentioned in this
page?
****
****
https://github.com/noxrepo/**nox-classic/wiki/NOX-GUI****<https://github.com/noxrepo/nox-classic/wiki/NOX-GUI****>
****
Weiyang ****
2012/4/25 Elias Paz <[email protected]>****
I have installed this library however I still dont get
the gui to
display
my switches. ****
I get this output when I run the gui****
****
QSqlQuery::exec: database not open****
QSqlQuery::exec: database not open****
****
*From:* Weiyang Mo
[mailto:moweiyang1988@gmail.**com<[email protected]>
]
*Sent:* Wednesday, April 25, 2012 5:29 PM
*To:* Elias Paz
*Cc:* [email protected]
*Subject:* Re: [nox-dev] NOX GUI****
****
Hi, the NOX-GUI shows all switches, so you should at
least run the
component monitoring. If you don't install
libqt4-sql-sqlite
Try to install it using "apt-get install
libqt4-sql-sqlite" and then try
the GUI again.
Hope it helps****
2012/4/25 Elias Paz <[email protected]>****
Hello,****
I am running the nox gui and my topology is not showing
up. I currently
dont have any hosts connected to my switches, does this
matter? What
could
be the reason for the nothing being displayed in the
GUI. ****
****
****
Thanks in advance****
Elias****
****
** **
Elias Paz
CompE Undergraduate
member of HESO
Hispanic Engineering and
Science Organization(SHPE/MAES)
[email protected]
(505) 550-9554
Elias Paz
CompE Undergraduate
member of HESO
Hispanic Engineering and
Science Organization(SHPE/MAES)
[email protected]
(505) 550-9554
