I am still having problems with this. Can anyone help me? -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Elias Marti Paz-Rudolph Sent: Saturday, April 28, 2012 4:05 PM To: Weiyang Mo Cc: [email protected] Subject: Re: [nox-dev] NOX GUI
Yes I still have problems On Thu, 26 Apr 2012 15:03:12 -0700 Weiyang Mo <[email protected]> wrote: > Hi, just use the following command: > > cd nox > sudo ./boot.sh > sudo mkdir build/ > cd build/ > sudo ../configure > sudo make > cd src > sudo make check > > Then > > cd nox/build/src > sudo ./nox_core --version > > If you already changed to destiny branch. You'll get the >following: NOX > 0.9.1~full~beta(nox_core) > > Best > > Weiyang > > 2012/4/26 Elias Marti Paz-Rudolph <[email protected]> > >> I have checked out Destiny however i dont know which >>install file you are >> reffering to >> >> >> Eias >> >> >> >> >> >> >> On Wed, 25 Apr 2012 21:10:03 -0700 >> Weiyang Mo <[email protected]> wrote: >> >>> Have you checked the NOX to destiny branch? It is Zaku >>>by default. >>> >>> To do this >>> >>> cd nox >>> git checkout destiny >>> >>> Then repeat each step referring to INSTALL file. >>> >>> Best >>> >>> Weiyang >>> >>> 2012/4/25 Elias Paz <[email protected]> >>> >>> Yes all dependencies are installed**** >>>> >>>> ** ** >>>> >>>> *From:* Weiyang Mo >>>>[mailto:moweiyang1988@gmail.**com<[email protected]> >>>> ] >>>> *Sent:* Wednesday, April 25, 2012 8:05 PM >>>> >>>> *To:* Elias Paz >>>> *Cc:* [email protected] >>>> *Subject:* Re: [nox-dev] NOX GUI**** >>>> >>>> ** ** >>>> >>>> >>>> So have you already installed all the dependencies >>>>mentioned in this >>>> page? >>>> **** >>>> >>>> **** >>>> >>>> https://github.com/noxrepo/**nox-classic/wiki/NOX-GUI****<https://github.com /noxrepo/nox-classic/wiki/NOX-GUI****> >>>> >>>> **** >>>> >>>> Weiyang **** >>>> >>>> 2012/4/25 Elias Paz <[email protected]>**** >>>> >>>> >>>> I have installed this library however I still don't get >>>>the gui to >>>> display >>>> my switches. **** >>>> >>>> I get this output when I run the gui**** >>>> >>>> **** >>>> >>>> QSqlQuery::exec: database not open**** >>>> >>>> QSqlQuery::exec: database not open**** >>>> >>>> **** >>>> >>>> *From:* Weiyang Mo >>>>[mailto:moweiyang1988@gmail.**com<[email protected]> >>>> ] >>>> *Sent:* Wednesday, April 25, 2012 5:29 PM >>>> *To:* Elias Paz >>>> *Cc:* [email protected] >>>> *Subject:* Re: [nox-dev] NOX GUI**** >>>> >>>> **** >>>> >>>> >>>> Hi, the NOX-GUI shows all switches, so you should at >>>>least run the >>>> component monitoring. If you don't install >>>>libqt4-sql-sqlite >>>> >>>> Try to install it using "apt-get install >>>>libqt4-sql-sqlite" and then try >>>> the GUI again. >>>> >>>> Hope it helps**** >>>> >>>> 2012/4/25 Elias Paz <[email protected]>**** >>>> >>>> Hello,**** >>>> >>>> >>>> I am running the nox gui and my topology is not showing >>>>up. I currently >>>> don't have any hosts connected to my switches, does this >>>>matter? What >>>> could >>>> be the reason for the nothing being displayed in the >>>>GUI. **** >>>> >>>> **** >>>> >>>> **** >>>> >>>> Thanks in advance**** >>>> >>>> Elias**** >>>> >>>> **** >>>> >>>> ** ** >>>> >>>> >> Elias Paz >> CompE Undergraduate >> member of HESO >> Hispanic Engineering and >> Science Organization(SHPE/MAES) >> [email protected] >> (505) 550-9554 >> Elias Paz CompE Undergraduate member of HESO Hispanic Engineering and Science Organization(SHPE/MAES) [email protected] (505) 550-9554
