sr, I'm wrong Indeed, openvswitch can't connect to NOX. what is my problem? this is log:
00069|openflow|DBG:Passive tcp interface bound to port 6633 00070|nox|INFO:nox bootstrap complete 00071|openflow|DBG:Passive tcp interface received connection 00072|openflow|DBG:stream: negotiated OpenFlow version 0x01 (we support versions 0x01 to 0x01 inclusive, peer no later than version 0x01) 00073|nox|DBG:Success sending in 'sending switch config' 00074|nox|DBG:Success sending in 'receiving features reply' 00075|nox|DBG:Success receiving in 'receiving features reply' 00076|nox|DBG:Success sending in 'receiving ofmp capability reply' 00077|nox|DBG:Success receiving in 'receiving ofmp capability reply' 00078|nox|DBG:Datapath 002320fc9478 sent error in response to capability reply, assuming no management support 00079|nox|DBG:No switch auth module registered, auto-approving switch 00080|nox|DBG:Registering switch with DPID = 2320fc9478 00081|authenticator|DBG:Received dp 2320fc9478 join. 00082|authenticator|DBG:Switch 2320fc9478 isn't registered 00083|authenticator|DBG:Location 2320fc9478:65534 isn't registered 00084|openflow-event|DBG:received echo-request event from 002320fc9478 (len:0) 00085|openflow-event|DBG:received echo-request event from 002320fc9478 (len:0) 00086|openflow-event|DBG:received echo-request event from 002320fc9478 (len:0) 00087|openflow-event|DBG:received echo-request event from 002320fc9478 (len:0) 00088|openflow-event|DBG:received echo-request event from 002320fc9478 (len:0) 00089|openflow-event|DBG:received echo-request event from 002320fc9478 (len:0) 00090|openflow-event|DBG:received echo-request event from 002320fc9478 (len:0) 00091|openflow-event|DBG:received echo-request event from 002320fc9478 (len:0) in Mininet, if I run pingall, I got the log: ... 00078|nox|DBG:Datapath 002320fc9478 sent error in response to capability reply, assuming no management support 00079|nox|DBG:No switch auth module registered, auto-approving switch 00080|nox|DBG:Registering switch with DPID = 2320fc9478 00081|authenticator|DBG:Received dp 2320fc9478 join. 00082|authenticator|DBG:Switch 2320fc9478 isn't registered 00083|authenticator|DBG:Location 2320fc9478:65534 isn't registered 00084|openflow-event|DBG:received packet-in event from 002320fc9478 (len:42) 00085|authenticator|DBG:Automatically authing 00:00:00:00:00:02 0.0.0.0. 00086|authenticator|DBG:Binding for host doesnt exist, using default. 00087|authenticator|DBG:Host auth event received. 00088|authenticator|ERR:Cannot authenticate host authenticated, location 2320fc9478:1 not active. 00089|openflow-event|DBG:received packet-in event from 002320fc9478 (len:42) 00090|authenticator|DBG:Automatically authing 00:00:00:00:00:02 0.0.0.0. 00091|authenticator|DBG:Binding for host doesnt exist, using default. 00092|authenticator|DBG:Host auth event received. 00093|authenticator|ERR:Cannot authenticate host authenticated, location 2320fc9478:1 not active. 00094|openflow-event|DBG:received echo-request event from 002320fc9478 (len:0) 00095|openflow-event|DBG:received packet-in event from 002320fc9478 (len:42) 00096|authenticator|DBG:Automatically authing 00:00:00:00:00:02 0.0.0.0. 00097|authenticator|DBG:Binding for host doesnt exist, using default. 00098|authenticator|DBG:Host auth event received. 00099|authenticator|ERR:Cannot authenticate host authenticated, location 2320fc9478:1 not active. ... what is my problem? Thanks in advance, -duongnt 2010/9/18 duong nguyen <[email protected]> > Thanks for quick reply, > > I only want to confirm the zaku don't support OpenFlow0.8.9.:) > > Another question (maybe stupid :"> because I'm not very familiar with > OpenvSwitch): to the zaku work with the Openvswitch, what I have to do? > > I upgraded mininet to of1.0 and the switch is Openvswitch1.0.0 > and I used the following commands: > > run mininet: sudo mn --mac --switch ovsk --controller remote > run NOX-zaku: ./nox_core -v -i ptcp: routing > > the switch connected to NOX. but 2 host can't ping each other? > > > > > > > 2010/9/18 James "Murphy" McCauley <[email protected]> > > Nope, sorry. The zaku branch only supports OpenFlow 1.0. If I recall, >> Mininet supports OpenFlow 1.0, but if you're stuck with some 0.8.9 >> configuration, you are pretty much stuck with the openflow-0.8.9 branch of >> NOX. >> >> -- Murphy >> >> On Sep 18, 2010, at 1:05 AM, duong nguyen wrote: >> >> > Hi, >> > >> > I'm using Mininet supporting OpenFlow0.8.9 >> > Please tell me if NOX-Kazu support OpenFlow0.8.9 ? >> > >> > thanks a lot, >> > -duongnt >> > >> > >> > >> > _______________________________________________ >> > nox-dev mailing list >> > [email protected] >> > http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org >> >> >
_______________________________________________ nox-dev mailing list [email protected] http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
