Hi Doung, If you do not mind, can you explain the real problem and what your solution is? This will help others with this in the future.
Thank you. Regards KK On 21 September 2010 09:47, duong nguyen <[email protected]> wrote: > Solved > Thanks, > > 2010/9/18 duong nguyen <[email protected]> >> >> sr, I'm wrong >> >> Indeed, openvswitch can't connect to NOX. what is my problem? >> this is log: >> >> 00069|openflow|DBG:Passive tcp interface bound to port 6633 >> 00070|nox|INFO:nox bootstrap complete >> 00071|openflow|DBG:Passive tcp interface received connection >> 00072|openflow|DBG:stream: negotiated OpenFlow version 0x01 (we support >> versions 0x01 to 0x01 inclusive, peer no later than version 0x01) >> 00073|nox|DBG:Success sending in 'sending switch config' >> 00074|nox|DBG:Success sending in 'receiving features reply' >> 00075|nox|DBG:Success receiving in 'receiving features reply' >> 00076|nox|DBG:Success sending in 'receiving ofmp capability reply' >> 00077|nox|DBG:Success receiving in 'receiving ofmp capability reply' >> 00078|nox|DBG:Datapath 002320fc9478 sent error in response to capability >> reply, assuming no management support >> 00079|nox|DBG:No switch auth module registered, auto-approving switch >> 00080|nox|DBG:Registering switch with DPID = 2320fc9478 >> 00081|authenticator|DBG:Received dp 2320fc9478 join. >> 00082|authenticator|DBG:Switch 2320fc9478 isn't registered >> 00083|authenticator|DBG:Location 2320fc9478:65534 isn't registered >> 00084|openflow-event|DBG:received echo-request event from 002320fc9478 >> (len:0) >> 00085|openflow-event|DBG:received echo-request event from 002320fc9478 >> (len:0) >> 00086|openflow-event|DBG:received echo-request event from 002320fc9478 >> (len:0) >> 00087|openflow-event|DBG:received echo-request event from 002320fc9478 >> (len:0) >> 00088|openflow-event|DBG:received echo-request event from 002320fc9478 >> (len:0) >> 00089|openflow-event|DBG:received echo-request event from 002320fc9478 >> (len:0) >> 00090|openflow-event|DBG:received echo-request event from 002320fc9478 >> (len:0) >> 00091|openflow-event|DBG:received echo-request event from 002320fc9478 >> (len:0) >> >> >> in Mininet, if I run pingall, I got the log: >> >> ... >> 00078|nox|DBG:Datapath 002320fc9478 sent error in response to capability >> reply, assuming no management support >> 00079|nox|DBG:No switch auth module registered, auto-approving switch >> 00080|nox|DBG:Registering switch with DPID = 2320fc9478 >> 00081|authenticator|DBG:Received dp 2320fc9478 join. >> 00082|authenticator|DBG:Switch 2320fc9478 isn't registered >> 00083|authenticator|DBG:Location 2320fc9478:65534 isn't registered >> 00084|openflow-event|DBG:received packet-in event from 002320fc9478 >> (len:42) >> 00085|authenticator|DBG:Automatically authing 00:00:00:00:00:02 0.0.0.0. >> 00086|authenticator|DBG:Binding for host doesnt exist, using default. >> 00087|authenticator|DBG:Host auth event received. >> 00088|authenticator|ERR:Cannot authenticate host authenticated, location >> 2320fc9478:1 not active. >> 00089|openflow-event|DBG:received packet-in event from 002320fc9478 >> (len:42) >> 00090|authenticator|DBG:Automatically authing 00:00:00:00:00:02 0.0.0.0. >> 00091|authenticator|DBG:Binding for host doesnt exist, using default. >> 00092|authenticator|DBG:Host auth event received. >> 00093|authenticator|ERR:Cannot authenticate host authenticated, location >> 2320fc9478:1 not active. >> 00094|openflow-event|DBG:received echo-request event from 002320fc9478 >> (len:0) >> 00095|openflow-event|DBG:received packet-in event from 002320fc9478 >> (len:42) >> 00096|authenticator|DBG:Automatically authing 00:00:00:00:00:02 0.0.0.0. >> 00097|authenticator|DBG:Binding for host doesnt exist, using default. >> 00098|authenticator|DBG:Host auth event received. >> 00099|authenticator|ERR:Cannot authenticate host authenticated, location >> 2320fc9478:1 not active. >> >> ... >> >> what is my problem? >> >> Thanks in advance, >> -duongnt >> 2010/9/18 duong nguyen <[email protected]> >>> >>> Thanks for quick reply, >>> >>> I only want to confirm the zaku don't support OpenFlow0.8.9.:) >>> >>> Another question (maybe stupid :"> because I'm not very familiar with >>> OpenvSwitch): to the zaku work with the Openvswitch, what I have to do? >>> >>> I upgraded mininet to of1.0 and the switch is Openvswitch1.0.0 >>> and I used the following commands: >>> >>> run mininet: sudo mn --mac --switch ovsk --controller remote >>> run NOX-zaku: ./nox_core -v -i ptcp: routing >>> >>> the switch connected to NOX. but 2 host can't ping each other? >>> >>> >>> >>> >>> >>> 2010/9/18 James "Murphy" McCauley <[email protected]> >>>> >>>> Nope, sorry. The zaku branch only supports OpenFlow 1.0. If I recall, >>>> Mininet supports OpenFlow 1.0, but if you're stuck with some 0.8.9 >>>> configuration, you are pretty much stuck with the openflow-0.8.9 branch of >>>> NOX. >>>> >>>> -- Murphy >>>> >>>> On Sep 18, 2010, at 1:05 AM, duong nguyen wrote: >>>> >>>> > Hi, >>>> > >>>> > I'm using Mininet supporting OpenFlow0.8.9 >>>> > Please tell me if NOX-Kazu support OpenFlow0.8.9 ? >>>> > >>>> > thanks a lot, >>>> > -duongnt >>>> > >>>> > >>>> > >>>> > _______________________________________________ >>>> > nox-dev mailing list >>>> > [email protected] >>>> > http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org >>>> >>> >> > > > _______________________________________________ > nox-dev mailing list > [email protected] > http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org > > _______________________________________________ nox-dev mailing list [email protected] http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
