both 3 and 4 should be fixed on trunk -- Message sent from mobile device
Am 02.03.2011 um 18:47 schrieb Dennis Lundberg <denn...@apache.org>: > On 2011-02-28 20:43, Dennis Lundberg wrote: >> On 2011-02-27 16:04, Dennis Lundberg wrote: >>> Hi >>> >>> First off - sorry for the long delay. I didn't realize that I was >>> supposed to vote. >>> >>> I've checked the signatures and checksums of the staged artifacts, and >>> they are all fine. >>> >>> I tried to build the source bundle, but didn't get very far because the >>> npanday repo seems to be down, as Lars noted in related thread. >> >> Now that the repo is back up again I got a lot further - all the way to >> "NPanday :: .NET Model :: POM". There the build fails, as expected, >> because I don't have Visual Studio (or its tools) installed. >> >> Will hopefully have time to try building on another machine tomorrow. > > Now I've done enough testing to give this release my +1 vote. > > Installation from msi package works fine. > > > > A couple of things that we have run into during testing, that can be > fixed in later versions. These were all found running on Windows 7 64-bit. > > 1. We were not able to build from the source bundle all the way to the > end. This was on a machine with VS2008 and VS2010 installed. See log > file at the end of this message. The build fails in the module "NPanday > :: Repository Builder". > > 2. Some interdependency between different modules is standing in the way > of doing 'mvn clean verify' on a machine without any npanday > 1.3-incubating artifacts in the local repo. One must run 'mvn clean > install' instead. This is caused by a bug in Maven 2, which has been > fixed in Maven 3. > > 3. Building with Maven 3 fails on one of the modules related to the > lifecycle. Sorry, don't remember which one now. I think Lars already has > done some work to fix this on trunk. > > 4. Running a 'mvn verify' that failed halfway through, and after that > running 'mvn verify' again (without mvn clean in between) fails with an > error saying that a mkdir command failed. > > 5. We ran into the 260 char max path length issue with the source bundle > unpacked in the users home directory. Moving the sources to the root > directory solved this. > > > > The log from the failed build under 1. > > > [ERROR] BUILD ERROR > [INFO] > ------------------------------------------------------------------------ > [INFO] Failed to resolve artifact. > > Missing: > ---------- > 1) VsWebSite.Interop:VsWebSite.Interop:gac:b03f5f7f11d50a3a:8.0.0.0 > > Try downloading the file manually from the project website. > > Then, install it using the command: > mvn install:install-file -DgroupId=VsWebSite.Interop > -DartifactId=VsWebSite.Interop -Dversion=8.0.0.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac -Dfile=/path/to/file > > Alternatively, if you host your own repository you can deploy the file > there: > mvn deploy:deploy-file -DgroupId=VsWebSite.Interop > -DartifactId=VsWebSite.Interop -Dversion=8.0.0.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac -Dfile=/path/to/file > -Durl=[url] -DrepositoryId=[id] > > Path to dependency: > 1) npanday:dotnet-repository-builder:pom:1.3-incubating > 2) > npanday.visualstudio:NPanday.VisualStudio.Addin:visual-studio-addin:1.3-incubating > 3) VsWebSite.Interop:VsWebSite.Interop:gac:b03f5f7f11d50a3a:8.0.0.0 > > 2) EnvDTE:EnvDTE:gac:b03f5f7f11d50a3a:8.0.0.0 > > Try downloading the file manually from the project website. > > Then, install it using the command: > mvn install:install-file -DgroupId=EnvDTE -DartifactId=EnvDTE > -Dversion=8.0.0.0 -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac > -Dfile=/path/to/file > > Alternatively, if you host your own repository you can deploy the file > there: > mvn deploy:deploy-file -DgroupId=EnvDTE -DartifactId=EnvDTE > -Dversion=8.0.0.0 -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac > -Dfile=/path/to/file-Durl=[url] -DrepositoryId=[id] > > Path to dependency: > 1) npanday:dotnet-repository-builder:pom:1.3-incubating > 2) npanday.visualstudio:NPanday.VisualStudio:library:1.3-incubating > 3) EnvDTE:EnvDTE:gac:b03f5f7f11d50a3a:8.0.0.0 > > 3) > Microsoft.Build.Engine:Microsoft.Build.Engine:gac_msil:b03f5f7f11d50a3a:2.0.0.0 > > Try downloading the file manually from the project website. > > Then, install it using the command: > mvn install:install-file -DgroupId=Microsoft.Build.Engine > -DartifactId=Microsoft.Build.Engine -Dversion=2.0.0.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac_msil -Dfile=/path/to/file > > Alternatively, if you host your own repository you can deploy the file > there: > mvn deploy:deploy-file -DgroupId=Microsoft.Build.Engine > -DartifactId=Microsoft.Build.Engine -Dversion=2.0.0.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac_msil -Dfile=/path/to/file > -Durl=[url] -DrepositoryId=[id] > > Path to dependency: > 1) npanday:dotnet-repository-builder:pom:1.3-incubating > 2) > npanday.visualstudio:NPanday.VisualStudio.Addin:visual-studio-addin:1.3-incubating > 3) > npanday.projectimporter:NPanday.ProjectImporterEngine:library:1.3-incubating > 4) > Microsoft.Build.Engine:Microsoft.Build.Engine:gac_msil:b03f5f7f11d50a3a:2.0.0.0 > > 4) > Microsoft.VisualStudio.CommandBars:Microsoft.VisualStudio.CommandBars:gac:b03f5f7f11d50a3a:8.0.0.0 > > Try downloading the file manually from the project website. > > Then, install it using the command: > mvn install:install-file > -DgroupId=Microsoft.VisualStudio.CommandBars > -DartifactId=Microsoft.VisualStudio.CommandBars -Dversion=8.0.0.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac -Dfile=/path/to/file > > Alternatively, if you host your own repository you can deploy the file > there: > mvn deploy:deploy-file > -DgroupId=Microsoft.VisualStudio.CommandBars > -DartifactId=Microsoft.VisualStudio.CommandBars -Dversion=8.0.0.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac -Dfile=/path/to/file > -Durl=[url] -DrepositoryId=[id] > > Path to dependency: > 1) npanday:dotnet-repository-builder:pom:1.3-incubating > 2) > npanday.visualstudio:NPanday.VisualStudio.Addin:visual-studio-addin:1.3-incubating > 3) > Microsoft.VisualStudio.CommandBars:Microsoft.VisualStudio.CommandBars:gac:b03f5f7f11d50a3a:8.0.0.0 > > 5) EnvDTE80:EnvDTE80:gac:b03f5f7f11d50a3a:8.0.0.0 > > Try downloading the file manually from the project website. > > Then, install it using the command: > mvn install:install-file -DgroupId=EnvDTE80 -DartifactId=EnvDTE80 > -Dversion=8.0.0.0 -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac > -Dfile=/path/to/file > > Alternatively, if you host your own repository you can deploy the file > there: > mvn deploy:deploy-file -DgroupId=EnvDTE80 -DartifactId=EnvDTE80 > -Dversion=8.0.0.0 -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac > -Dfile=/path/to/file -Durl=[url] -DrepositoryId=[id] > > Path to dependency: > 1) npanday:dotnet-repository-builder:pom:1.3-incubating > 2) > npanday.visualstudio:NPanday.VisualStudio.Addin:visual-studio-addin:1.3-incubating > 3) EnvDTE80:EnvDTE80:gac:b03f5f7f11d50a3a:8.0.0.0 > > 6) VSLangProj:VSLangProj:gac:b03f5f7f11d50a3a:7.0.3300.0 > > Try downloading the file manually from the project website. > > Then, install it using the command: > mvn install:install-file -DgroupId=VSLangProj > -DartifactId=VSLangProj -Dversion=7.0.3300.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac -Dfile=/path/to/file > > Alternatively, if you host your own repository you can deploy the file > there: > mvn deploy:deploy-file -DgroupId=VSLangProj > -DartifactId=VSLangProj -Dversion=7.0.3300.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac -Dfile=/path/to/file > -Durl=[url] -DrepositoryId=[id] > > Path to dependency: > 1) npanday:dotnet-repository-builder:pom:1.3-incubating > 2) > npanday.visualstudio:NPanday.VisualStudio.Addin:visual-studio-addin:1.3-incubating > 3) VSLangProj:VSLangProj:gac:b03f5f7f11d50a3a:7.0.3300.0 > > 7) VSLangProj80:VSLangProj80:gac:b03f5f7f11d50a3a:8.0.0.0 > > Try downloading the file manually from the project website. > > Then, install it using the command: > mvn install:install-file -DgroupId=VSLangProj80 > -DartifactId=VSLangProj80 -Dversion=8.0.0.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac -Dfile=/path/to/file > > Alternatively, if you host your own repository you can deploy the file > there: > mvn deploy:deploy-file -DgroupId=VSLangProj80 > -DartifactId=VSLangProj80 -Dversion=8.0.0.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac -Dfile=/path/to/file > -Durl=[url] -DrepositoryId=[id] > > Path to dependency: > 1) npanday:dotnet-repository-builder:pom:1.3-incubating > 2) > npanday.visualstudio:NPanday.VisualStudio.Addin:visual-studio-addin:1.3-incubating > 3) VSLangProj80:VSLangProj80:gac:b03f5f7f11d50a3a:8.0.0.0 > > 8) Extensibility:Extensibility:gac:b03f5f7f11d50a3a:7.0.3300.0 > > Try downloading the file manually from the project website. > > Then, install it using the command: > mvn install:install-file -DgroupId=Extensibility > -DartifactId=Extensibility -Dversion=7.0.3300.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac -Dfile=/path/to/file > > Alternatively, if you host your own repository you can deploy the file > there: > mvn deploy:deploy-file -DgroupId=Extensibility > -DartifactId=Extensibility -Dversion=7.0.3300.0 > -Dclassifier=b03f5f7f11d50a3a -Dpackaging=gac -Dfile=/path/to/file > -Durl=[url] -DrepositoryId=[id] > > Path to dependency: > 1) npanday:dotnet-repository-builder:pom:1.3-incubating > 2) > npanday.visualstudio:NPanday.VisualStudio.Addin:visual-studio-addin:1.3-incubating > 3) Extensibility:Extensibility:gac:b03f5f7f11d50a3a:7.0.3300.0 > > ---------- > 8 required artifacts are missing. > > for artifact: > npanday:dotnet-repository-builder:pom:1.3-incubating > > from the specified remote repositories: > central (http://repo1.maven.org/maven2), > internal (http://xxx/archiva/repository/internal), > npanday (http://xxx/archiva/repository/npanday), > aduna.org (http://repository.aduna-software.org/maven2), > snapshots (http://repo.mdh.se/archiva/repository/snapshots), > npanday.repo.1 (http://xxx/archiva/repository/internal/), > npanday.repo.0 (http://xxx/archiva/repository/internal), > npanday.releases > (http://repo.npanday.org/archiva/repository/npanday-releases), > npanday.3rdparty (http://repo.npanday.org/archiva/repository/3rdparty), > apache.snapshots (http://repository.apache.org/snapshots) > > -- > Dennis Lundberg
