Good question. I've not used this patch, so I can't offer much help
(also, while I've put mashinspector to work, I've not entered its details too much also). Pedro Estrela > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Claus Christmann > Sent: quinta-feira, 15 de Novembro de 2007 14:15 > To: ns users > Subject: [ns] oTcl debugging: MASH inspector causes segmentation fault > > > Hi list, > > I am trying to debug the mw-node patch for ns2 > (http://www.q2s.ntnu.no/~paquerea/ns.html) using Pedro's guide to get > oTcl debugging capabilities > (http://tagus.inesc-id.pt/~pestrela/ns2/ns2_debugging2.html). > > One of the apparently very useful tools is the MashInspector, which > unfortunately crashes when inspecting objects introduced be the mw-node > patch. > > *Has anybody experience/hints/links on oTcl debugging with the mw-node > patch?* > > Thanks for any feedback. > > Claus > -- > Claus Christmann > Graduate Research Assistant > > Georgia Institute of Technology > 270 Ferst Drive > Atlanta, GA 30332-0150 > > http://uav.ae.gatech.edu