Good catch - we would not have found this! George Henne NS BASIC Corporation http://www.nsbasic.com
> > >Hi George, >I found the problem with "NSBasic not found" by the FriendlyArm Mini2440 >board. When FriendlyArm created the WinCE5.0 to work with their new Sony >3.5" display, they mis-configured Platform Builder. I worked with them >in China to create new BIN files for WinCE5.0 OS that now work with >NSBasic. For anyone who is having a similar problem, I've posted the bin >files on my website for download. Users will have to follow the >instructions that came with their board and Sony 3.5" display (X35)to >properly install WinCE5.0 onto their Mini2440 board. Please go to http:// >www.ipreppress.com/Page1/FriendlyArm_Sony_3_5.htm for the zip file. > >Kurt > >From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >Behalf Of George Henne >Sent: Monday, March 28, 2011 3:07 PM >To: nsbasic-ce@yahoogroups.com >Subject: Re(16): [nsbasic-ce] Cannot find NSBasic.exe > > >Could you send it directly to me at support (at) nsbasic.com? > >George Henne >NS BASIC Corporation >http://www.nsbasic.com > >>[Attachment(s) from Kurt Goszyk - iPREP included below] >> >>Hi George, >>Attached is a sample program that exhibits the behavior. I've included >>the .exe, installers and the nsb source. >> >>This was compiled with NSBasic 8.0 and ran successfully on the >>FriendlyArm board with WinCE5.0 and 3.5 display. I learned that they >>changed to another 3.5" display vendor and redid the BSP and created >>their updated WinCE5.0. Now, when trying to run my sample program, I get >>a "Cannot find NSBasic.exe" error message. >> >>When compiling the NSB source, I use the default install folders selection. >>Kurt >> >>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>Behalf Of George Henne >>Sent: Monday, March 28, 2011 2:19 PM >>To: nsbasic-ce@yahoogroups.com >>Subject: Re(14): [nsbasic-ce] Cannot find NSBasic.exe >> >> >>Could you send me the .exe? >> >>> >>> >>>Once installed, I go to the folder the app is in and double tap the .exe >>>icon to run. >>> >>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>Behalf Of George Henne >>>Sent: Monday, March 28, 2011 1:58 PM >>>To: nsbasic-ce@yahoogroups.com >>>Subject: Re(12): [nsbasic-ce] Cannot find NSBasic.exe >>> >>> >>>How are you starting your app? >>> >>>George Henne >>>NS BASIC Corporation >>>http://www.nsbasic.com >>> >>>> >>>> >>>>Yes I have. Maybe long shot, but only thing left is to try to re-compile >>>>with updated NSBasic. >>>> >>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>>Behalf Of George Henne >>>>Sent: Monday, March 28, 2011 1:24 PM >>>>To: nsbasic-ce@yahoogroups.com >>>>Subject: Re(10): [nsbasic-ce] Cannot find NSBasic.exe >>>> >>>> >>>>Everything seems correct. I assume you have tried the other platform >>>>settings, just in case? >>>> >>>>> >>>>> >>>>>It's set to: >>>>>2577 - ARMV4/StrongARM/SA1100 >>>>> >>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>>>Behalf Of George Henne >>>>>Sent: Monday, March 28, 2011 12:43 PM >>>>>To: nsbasic-ce@yahoogroups.com >>>>>Subject: Re(8): [nsbasic-ce] Cannot find NSBasic.exe >>>>> >>>>> >>>>>In Tools...Options, what is Platform set to? >>>>> >>>>>> >>>>>> >>>>>>Hi George, >>>>>>Have tried everything at this point. Since I'm using NSBasic 8.0, how >>>>>>can I get 8.1 or 8.2 to try to recompile my application for WinCE. >>>>>>Kurt >>>>>> >>>>>> >>>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>>>>Behalf Of George Henne >>>>>>Sent: Wednesday, March 09, 2011 10:50 AM >>>>>>To: nsbasic-ce@yahoogroups.com >>>>>>Subject: Re(6): [nsbasic-ce] Cannot find NSBasic.exe >>>>>> >>>>>> >>>>>>(sorry I missed your earlier message) >>>>>> >>>>>>No ideas at this point - it just doesn't make sense. I assume you have >>>>>>tried a hard reset? >>>>>> >>>>>>> >>>>>>> >>>>>>>Hi George. >>>>>>>Using WinCE 5.0. Any thoughts? >>>>>>>Kurt >>>>>>> >>>>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>>>>>Behalf Of George Henne >>>>>>>Sent: Monday, March 07, 2011 12:32 PM >>>>>>>To: nsbasic-ce@yahoogroups.com >>>>>>>Subject: Re(4): [nsbasic-ce] Cannot find NSBasic.exe >>>>>>> >>>>>>> >>>>>>>What version of Windows CE? >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>No problem. The Device is a Friendly ARM 2440 board with ARM 9 Samsung >>>>>>>>S3C2440AL-40. >>>>>>>> >>>>>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic- c...@yahoogroups.com] On >>>>>>>>Behalf Of George Henne >>>>>>>>Sent: Monday, March 07, 2011 12:01 PM >>>>>>>>To: nsbasic-ce@yahoogroups.com >>>>>>>>Subject: Re: Re(2): [nsbasic-ce] Cannot find NSBasic.exe >>>>>>>> >>>>>>>> >>>>>>>>What is the device? >>>>>>>> >>>>>>>>What os is it running? >>>>>>>> >>>>>>>>Please excuse any typos. This message is sent from my mobile device. >>>>>>>> >>>>>>>>On Mar 7, 2011, at 11:53 AM, "Kurt Goszyk - iPREP" ><k...@ipreppress.com> >>>>>>>>wrote: >>>>>>>> >>>>>>>>The working app was created under NSBasic 8.0. Yes, I am using the >>>>>>>>installer created by NS Basic/CE and am using the NSBasic 8.0 IDE. >>>>>>>>Kurt >>>>>>>> >>>>>>>> >>>>>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic- c...@yahoogroups.com] On >>>>>>>>Behalf Of George Henne >>>>>>>>Sent: Monday, March 07, 2011 11:33 AM >>>>>>>>To: nsbasic-ce@yahoogroups.com >>>>>>>>Subject: Re(2): [nsbasic-ce] Cannot find NSBasic.exe >>>>>>>> >>>>>>>> >>>>>>>>Which version of NS Basic/CE are you using? >>>>>>>> >>>>>>>>Are you installing using the installer created by NS Basic/CE? >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>Hi George. >>>>>>>>>Yes, several times with the same error message. >>>>>>>>> >>>>>>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic- >c...@yahoogroups.com] On >>>>>>>>>Behalf Of George Henne >>>>>>>>>Sent: Monday, March 07, 2011 11:14 AM >>>>>>>>>To: nsbasic-ce@yahoogroups.com >>>>>>>>>Subject: Re: [nsbasic-ce] Cannot find NSBasic.exe >>>>>>>>> >>>>>>>>> >>>>>>>>>Hi Kurt, >>>>>>>>> >>>>>>>>>Did you reinstall your app? >>>>>>>>> >>>>>>>>>George >>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>Hi, >>>>>>>>>>I have a working NSbasic application in WinCE5.0. I received an >>updated >>>>>>>>>>board with more program memory but same file structure and processor. >>>>>>>>>>When I try to run my previously working app, I now get "Cannot find >>>>>>>>>>NSBasic.exe. Please reinstall. >>>>>>>>>> >>>>>>>>>>What am I overlooking? thanks. >>>>>>>>>> >>>>>>>>>>Kurt Goszyk >>>>>>>>>>iPREPpress LLC >>>>>>>>>>www.ipreppress.com >>>>>>>>>>k...@ipreppress.com >>>>>>>>>>215-321-0447 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >> >> >>Attachment(s) from Kurt Goszyk - iPREP >> >>1 of 1 File(s) >> >>CalcTest.zip >> > > > > -- You received this message because you are subscribed to the Google Groups "nsb-ce" group. To post to this group, send email to nsb...@googlegroups.com. To unsubscribe from this group, send email to nsb-ce+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en.
