Hi Alfredo, > please make sure you disabled multiqueue (RSS=1,1,1,1), please
provide cat /proc/net/pf_ring/dev/eth3/info The output from the requested cat
command is as follows:- Name: eth3Index: 186Address:
8C:DC:D4:B4:F5:61Polling Mode: NAPI/ZCType:
EthernetFamily: Intel ixgbe 82599Max # TX Queues: 1# Used RX
Queues: 1Num RX Slots: 32768Num TX Slots: 32768 Why do we specify
four numbers on the RSS option, and not RSS=1,1 ? * POSSIBLE PROGRESS *
After a fresh ./load_driver.sh command, I’m unable to get ‘pfcount –I zc:eth3’
to receive all packets as previously described. However, if I run this command
ONCE with the –a option, every run of ‘pfcount –I zc:eth3’ thereafter with or
without the –a option appears to receive 100% packets or very close to it. I’m
now running more tests to explore this observation, and looking at code to
understand what is occurring. Regards,A.
--
Andrew Howard
[email protected]
_______________________________________________
Ntop-misc mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop-misc
