Did you bind pfsend/zsend to a cpu core?

Alfredo

> On 08 Jun 2016, at 22:44, Jason Lixfeld <[email protected]> wrote:
> 
> I don’t seem to be able to transmit the full 14.88Mpps to get full linerate. 
> Is there anything else I can tweak? I’ve added the -a option which has given 
> gotten me a bit closer, but not all the way.
> 
> My CPU is a 6 core Intel® Xeon® CPU E5-2620 v3 @ 2.40GHz
> 
> Thanks once again!
> 
> On Jun 8, 2016, at 4:21 PM, Alfredo Cardigliano <[email protected]> wrote:
> 
> Please use RSS=1,1,1,1,1,1 as you have 6 ports.
> 
> Alfredo
> 
> On 08 Jun 2016, at 22:11, [email protected] wrote:
> 
> Thanks Alfredo,
> 
> If I’m reading this correctly, eth2 has 12 Tx and Rx queues while eth7 has 1 
> each:
> 
> root@pgen:/home/jlixfeld/PF_RING/drivers/intel/ixgbe/ixgbe-4.1.5-zc/src# cat 
> /proc/net/pf_ring/dev/eth2/info Name: eth2 Index: 86 Address: 
> 00:0C:BD:08:80:98 Polling Mode: NAPI/ZC Type: Ethernet Family: Intel ixgbe 
> 82599 Max # TX Queues: 12 # Used RX Queues: 12 Num RX Slots: 32768 Num TX 
> Slots: 32768 
> root@pgen:/home/jlixfeld/PF_RING/drivers/intel/ixgbe/ixgbe-4.1.5-zc/src# cat 
> /proc/net/pf_ring/dev/eth7/info Name: eth7 Index: 83 Address: 
> 00:0C:BD:08:80:9D Polling Mode: NAPI/ZC Type: Ethernet Family: Intel ixgbe 
> 82599 Max # TX Queues: 1 # Used RX Queues: 1 Num RX Slots: 32768 Num TX 
> Slots: 32768 
> root@pgen:/home/jlixfeld/PF_RING/drivers/intel/ixgbe/ixgbe-4.1.5-zc/src#
> 
> load_driver.sh seems to be set to disable multi queue so I’m not quite sure 
> how this got this way, or how to correct it?
> 
> root@pgen:/home/jlixfeld/PF_RING/drivers/intel/ixgbe/ixgbe-4.1.5-zc/src# grep 
> -i rss load_driver.sh #insmod ./ixgbe.ko RSS=0,0,0,0 insmod ./ixgbe.ko 
> RSS=1,1,1,1 #insmod ./ixgbe.ko RSS=1,1,1,1 low_latency_tx=1 #insmod 
> ./ixgbe.ko MQ=1,1,1,1 RSS=16,16,16,16 #insmod ./ixgbe.ko RSS=1,1,1,1 
> FdirPballoc=3,3,3,3 #insmod ./ixgbe.ko RSS=1,1,1,1 numa_cpu_affinity=0,0,0,0 
> root@pgen:/home/jlixfeld/PF_RING/drivers/intel/ixgbe/ixgbe-4.1.5-zc/src#
> 
> On Jun 8, 2016, at 3:55 PM, Alfredo Cardigliano <[email protected]> wrote:
> 
> Hi Jason no problem, I was able to read something :-) Please check that both 
> the interfaces are configured with a single RSS queue (take a look at 
> /proc/net/pf_ring/dev/eth2/info)
> 
> Alfredo
> 
> On 08 Jun 2016, at 21:09, Jason Lixfeld <[email protected]> wrote:
> 
> My gosh! I’m so sorry for the way this is formatted. My mailer insists that 
> this message was sent in plain-text, not whatever the heck this is!
> 
> I’m sorry this is so impossible to read :(
> 
> On Jun 8, 2016, at 3:05 PM, [email protected] wrote:
> 
> Hello,
> 
> My first run through with poring. :)
> 
> I’ve compiled the zc variant of pfring in an attempt to get linerate between 
> two of the ports which are looped together.
> 
> The NIC is a 6 port 82599 based one.
> 
> root@pgen:/home/jlixfeld/PF_RING/drivers/intel/ixgbe/ixgbe-4.1.5-zc/src# 
> ./load_driver.sh irqbalance: no process found Configuring eth6 IFACE CORE 
> MASK -> FILE ======================= eth6 0 1 -> /proc/irq/87/smp_affinity 
> Configuring eth7 IFACE CORE MASK -> FILE ======================= eth7 0 1 -> 
> /proc/irq/89/smp_affinity Configuring eth2 IFACE CORE MASK -> FILE 
> ======================= eth2 0 1 -> /proc/irq/96/smp_affinity eth2 1 2 -> 
> /proc/irq/97/smp_affinity eth2 2 4 -> /proc/irq/98/smp_affinity eth2 3 8 -> 
> /proc/irq/99/smp_affinity eth2 4 10 -> /proc/irq/100/smp_affinity eth2 5 20 
> -> /proc/irq/101/smp_affinity eth2 6 40 -> /proc/irq/102/smp_affinity eth2 7 
> 80 -> /proc/irq/103/smp_affinity eth2 8 100 -> /proc/irq/104/smp_affinity 
> eth2 9 200 -> /proc/irq/105/smp_affinity eth2 10 400 -> 
> /proc/irq/106/smp_affinity eth2 11 800 -> /proc/irq/107/smp_affinity 
> Configuring eth3 IFACE CORE MASK -> FILE ======================= eth3 0 1 -> 
> /proc/irq/109/smp_affinity eth3 1 2 -> /proc/irq/110/smp_affinity eth3 2 4 -> 
> /proc/irq/111/smp_affinity eth3 3 8 -> /proc/irq/112/smp_affinity eth3 4 10 
> -> /proc/irq/113/smp_affinity eth3 5 20 -> /proc/irq/114/smp_affinity eth3 6 
> 40 -> /proc/irq/115/smp_affinity eth3 7 80 -> /proc/irq/116/smp_affinity eth3 
> 8 100 -> /proc/irq/117/smp_affinity eth3 9 200 -> /proc/irq/118/smp_affinity 
> eth3 10 400 -> /proc/irq/119/smp_affinity eth3 11 800 -> 
> /proc/irq/120/smp_affinity Configuring eth4 IFACE CORE MASK -> FILE 
> ======================= eth4 0 1 -> /proc/irq/91/smp_affinity Configuring 
> eth5 IFACE CORE MASK -> FILE ======================= eth5 0 1 -> 
> /proc/irq/93/smp_affinity 
> root@pgen:/home/jlixfeld/PF_RING/drivers/intel/ixgbe/ixgbe-4.1.5-zc/src#
> 
> My issue is that I only get 10Gbps in one direction. If zc:eth7 is the 
> sender, zc:eth2 only sees Rx @ 0.54Gbps:
> 
> root@pgen:/home/jlixfeld/PF_RING/userland/examples_zc# ./zsend -i zc:eth7 -c 2
> 
> Absolute Stats: 111'707'057 pkts – 9'383'392'788 bytes Actual Stats: 
> 13'983'520.42 pps – 9.40 Gbps [1133946996 bytes / 1.0 sec]
> 
> root@pgen:/home/jlixfeld/PF_RING/userland/examples_zc# ./zcount -i zc:eth2 -c 
> 1
> 
> Absolute Stats: 5'699'096 pkts (33'135'445 drops) – 478'724'064 bytes Actual 
> Stats: 802'982.00 pps (4'629'316.93 drops) – 0.54 Gbps
> 
> But, if zc:eth2 is the sender, zc:eth7 sees rates more in-line with what 
> zc:eth2 is sending.
> 
> root@pgen:/home/jlixfeld/PF_RING/userland/examples_zc# ./zsend -i zc:eth2 -c 2
> 
> Absolute Stats: 28'285'274 pkts – 2'375'963'016 bytes Actual Stats: 
> 14'114'355.24 pps – 9.48 Gbps [1185800280 bytes / 1.0 sec]
> 
> root@pgen:/home/jlixfeld/PF_RING/userland/examples_zc# ./zcount -i zc:eth7 -c 
> 1
> 
> Absolute Stats: 28'007'460 pkts (0 drops) – 2'352'626'640 bytes Actual Stats: 
> 14'044'642.54 pps (0.00 drops) – 9.44 Gbps
> 
> I’ve done some reading, but I haven’t found anything that has pointed me 
> towards a possible reason why this is happening. I’m wondering if anyone has 
> any thoughts?
> 
> Thanks!
> 
> _________________________________________ Ntop-misc mailing list 
> [email protected] 
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc 
> <https://u3172041.ct.sendgrid.net/wf/click?upn=UmVayPZKpIdftgoYx-2BU88-2B1jnUM7Rvx0OUKMS78f3Zn78u-2BsRXpXcIeS3oh8u5YEWIgu-2BvmYwr4GzDvZ-2FfPGPw-3D-3D_rhOy4YLBxOPOohPdjw4-2BtC7rnGr1J9pkUkX-2FFAaRhBOWAM77MdhIc6DTrhx2xYfAmrxxHoFPYTM9C7cbqT6B4Z1DxJ-2F2foMCcYzXmcSGFeB8PcXVIWoKO14u-2BzgLzX04sN9I31-2BVoCaMIGofNmRj6siHy2arRlzGF86mk59AmoRadAEWrU8-2Be-2F-2FCtl6-2F2H11EUkRqysPyOoKM2NvBNn22D0yExS8xFKFz9tO93BVKNc-3D>
> ___________________________________________ Ntop-misc mailing list 
> [email protected] 
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc 
> <https://u3172041.ct.sendgrid.net/wf/click?upn=UmVayPZKpIdftgoYx-2BU88-2B1jnUM7Rvx0OUKMS78f3Zn78u-2BsRXpXcIeS3oh8u5YEWIgu-2BvmYwr4GzDvZ-2FfPGPw-3D-3D_rhOy4YLBxOPOohPdjw4-2BtC7rnGr1J9pkUkX-2FFAaRhBOWAM77MdhIc6DTrhx2xYfAmrxxHoFPYTM9C7cbqT6B4UHYR85A3Y84zCeucH3VABGqbPdFpsgtZqOGTd1ZcwBMxotGh2EX323N01ZAWCSTRITWqHHWtFB4ez0vLbABHlj286gRhYGCVYREVO0vhI7Vu2CxBBH-2FqgLZtqCMn-2BoP7jpdVVmtli5l5xyN0Q2OjHw-3D>
> ___________________________________________ Ntop-misc mailing list 
> [email protected] 
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc 
> <https://u3172041.ct.sendgrid.net/wf/click?upn=UmVayPZKpIdftgoYx-2BU88-2B1jnUM7Rvx0OUKMS78f3Zn78u-2BsRXpXcIeS3oh8u5YEWIgu-2BvmYwr4GzDvZ-2FfPGPw-3D-3D_rhOy4YLBxOPOohPdjw4-2BtC7rnGr1J9pkUkX-2FFAaRhBOWAM77MdhIc6DTrhx2xYfAmrxxHoFPYTM9C7cbqT6B4TFzVdH-2FBWf8qHQhAMpuGTQXj-2BN-2FN4HKYucJ6ikvd3UxWg3UKhZoMZYi4CenfSxCk2bwD8VICBzsk4pbe6oJ-2BTDfc0wdeiXUdMx-2FnzCSWhCXGy3Zc3qQtz0g91NH8XGBjKrb-2FXaIRJhCa-2BIU06FCDBo-3D>
> _____________________________________________ Ntop-misc mailing list 
> [email protected] 
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc 
> <https://u3172041.ct.sendgrid.net/wf/click?upn=UmVayPZKpIdftgoYx-2BU88-2B1jnUM7Rvx0OUKMS78f3Zn78u-2BsRXpXcIeS3oh8u5YEWIgu-2BvmYwr4GzDvZ-2FfPGPw-3D-3D_rhOy4YLBxOPOohPdjw4-2BtC7rnGr1J9pkUkX-2FFAaRhBOWAM77MdhIc6DTrhx2xYfAmrxxHoFPYTM9C7cbqT6B4fDj9zVqbxhqM0Kgb7bgF3UpyZcNtMMvWH-2FUtWDEHfCOJiVH34CYdvQxWFC54GnL6SNtKRPnDN1w0Uih-2F-2Be97nMBgH6lQcwhwSwWqIWeoCmQU2FGNNsxybaXC7NY7V30DmUi6mhmVG1kw-2F5asf6gwDc-3D>
> _____________________________________________ Ntop-misc mailing list 
> [email protected] 
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc 
> <https://u3172041.ct.sendgrid.net/wf/click?upn=UmVayPZKpIdftgoYx-2BU88-2B1jnUM7Rvx0OUKMS78f3Zn78u-2BsRXpXcIeS3oh8u5YEWIgu-2BvmYwr4GzDvZ-2FfPGPw-3D-3D_rhOy4YLBxOPOohPdjw4-2BtC7rnGr1J9pkUkX-2FFAaRhBOWAM77MdhIc6DTrhx2xYfAmrxxHoFPYTM9C7cbqT6B4TVkkLT-2F-2FnNjrOTJTmepvAHQYMkeUQ9b36a1RDga-2BfQ7Pk-2Fi6KAQDMjhUOxDcvmOQm9omMgvwm66OVYlWoL83zg3GN-2FYQiEx876LaSnRyD2Krr0jLVuO-2Ft1SRi-2FnUAMAjoM3DCouLhfvT570-2Bw8-2F5eE-3D>
> _______________________________________________
> Ntop-misc mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc

Attachment: signature.asc
Description: Message signed with OpenPGP using GPGMail

_______________________________________________
Ntop-misc mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop-misc

Reply via email to