The NICs are all XL710 and not Napatech.
On Thu, Jul 14, 2016 at 1:43 AM, Luca Deri <[email protected]> wrote: > Jeremy > are you using Napatech NICs perhaps? If so, you need to start the napatech > services (/opt/napatech….) > > Cheers Luca > >> On 13 Jul 2016, at 19:27, Jeremy Ashton <[email protected]> wrote: >> >> Recently when I tried to configure an additional interface I got the >> following error: >> >> [zbalance_ipc] NT_ExplainError: Code=0x20000013 Error="NT Service is >> not started" >> NT_Init() failed: NT Service is not started >> [zbalance_ipc] NT_ExplainError: Code=0x20000013 Error="NT Service is >> not started" >> NT_InfoOpen() failed: NT Service is not started >> 13/Jul/2016 17:21:25 [zbalance_ipc.c:566] ERROR: pfring_zc_open_device >> error [Socket operation on non-socket] Please check that zc:<xxx> is >> up and not already used >> >> I get this error when running: >> sudo /usr/local/bin/zbalance_ipc -i zc:<xxx> -c 50 -n 2 -m 2 -g 0 -p >> >> which works perfectly fine for 4 other interfaces. The only >> difference being that each interface gets assigned its own clusterid. >> >> The box is Supermicro with XL170 NICs running Ubuntu 14.04. >> >> Any thoughts on how I might approach this? >> >> Cheers. >> _______________________________________________ >> Ntop-misc mailing list >> [email protected] >> http://listgateway.unipi.it/mailman/listinfo/ntop-misc > > _______________________________________________ > Ntop-misc mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop-misc _______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
