Which one is not working?

Alfredo

> On 14 Jul 2016, at 16:37, Jeremy Ashton <[email protected]> wrote:
> 
> Here is the output of “cat /proc/net/pf_ring/dev/*/info”
> 
> Name:              <site>_inet_<isp1>_1
> Index:             21
> Address:           0C:C4:7A:BC:A3:C8
> Polling Mode:      NAPI/ZC
> Type:              Ethernet
> Family:            Intel i40e
> Max # TX Queues:   1
> # Used RX Queues:  1
> Num RX Slots:      4096
> Num TX Slots:      4096
> Name:              <site>_inet_<isp2>_1
> Index:             23
> Address:           0C:C4:7A:BC:A3:CA
> Polling Mode:      NAPI/ZC
> Type:              Ethernet
> Family:            Intel i40e
> Max # TX Queues:   1
> # Used RX Queues:  1
> Num RX Slots:      4096
> Num TX Slots:      4096
> Name:              <site>_inet_<isp3>_1
> Index:             33
> Address:           0C:C4:7A:BC:9C:84
> Polling Mode:      NAPI/ZC
> Type:              Ethernet
> Family:            Intel i40e
> Max # TX Queues:   1
> # Used RX Queues:  1
> Num RX Slots:      4096
> Num TX Slots:      4096
> Name:              <site>_inet_<isp4>_1
> Index:             24
> Address:           0C:C4:7A:BC:A3:CB
> Polling Mode:      NAPI/ZC
> Type:              Ethernet
> Family:            Intel i40e
> Max # TX Queues:   1
> # Used RX Queues:  1
> Num RX Slots:      4096
> Num TX Slots:      4096
> Name:              <site>_ptp_<isp2>_1
> Index:             22
> Address:           0C:C4:7A:BC:A3:C9
> Polling Mode:      NAPI/ZC
> Type:              Ethernet
> Family:            Intel i40e
> Max # TX Queues:   1
> # Used RX Queues:  1
> Num RX Slots:      4096
> Num TX Slots:      4096
> Name:              bond0
> Index:             20
> Address:           00:00:00:00:00:00
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   16
> # Used RX Queues:  16
> Name:              cap10
> Index:             27
> Address:           0C:C4:7A:BC:A3:C6
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              cap11
> Index:             28
> Address:           0C:C4:7A:BC:A3:C7
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              cap12
> Index:             29
> Address:           0C:C4:7A:BC:9C:90
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              cap13
> Index:             30
> Address:           0C:C4:7A:BC:9C:91
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              cap14
> Index:             31
> Address:           0C:C4:7A:BC:9C:92
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              cap15
> Index:             32
> Address:           0C:C4:7A:BC:9C:93
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              cap5
> Index:             34
> Address:           0C:C4:7A:BC:9C:85
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              cap6
> Index:             35
> Address:           0C:C4:7A:BC:9C:86
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              cap7
> Index:             36
> Address:           0C:C4:7A:BC:9C:87
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              cap8
> Index:             25
> Address:           0C:C4:7A:BC:A3:C4
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              cap9
> Index:             26
> Address:           0C:C4:7A:BC:A3:C5
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   1
> # Used RX Queues:  1
> Name:              eth0
> Index:             3
> Address:           0C:C4:7A:6E:7C:3E
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   20
> # Used RX Queues:  20
> Name:              eth1
> Index:             5
> Address:           0C:C4:7A:6E:7C:3F
> Polling Mode:      NAPI
> Type:              Ethernet
> Family:            Standard NIC
> # Bound Sockets:   0
> Max # TX Queues:   20
> # Used RX Queues:  20
> 
> 
> On Thu, Jul 14, 2016 at 9:00 PM, Alfredo Cardigliano
> <[email protected]> wrote:
>> Hi Jeremy
>> please provide all interface names and the output of “cat 
>> /proc/net/pf_ring/dev/ethX/info” for all the interfaces.
>> 
>> Thank you
>> Alfredo
>> 
>>> On 14 Jul 2016, at 14:31, Jeremy Ashton <[email protected]> wrote:
>>> 
>>> The NICs are all XL710 and not Napatech.
>>> 
>>> On Thu, Jul 14, 2016 at 1:43 AM, Luca Deri <[email protected]> wrote:
>>>> Jeremy
>>>> are you using Napatech NICs perhaps? If so, you need to start the napatech 
>>>> services (/opt/napatech….)
>>>> 
>>>> Cheers Luca
>>>> 
>>>>> On 13 Jul 2016, at 19:27, Jeremy Ashton <[email protected]> wrote:
>>>>> 
>>>>> Recently when I tried to configure an additional interface I got the
>>>>> following error:
>>>>> 
>>>>> [zbalance_ipc] NT_ExplainError: Code=0x20000013 Error="NT Service is
>>>>> not started"
>>>>> NT_Init() failed: NT Service is not started
>>>>> [zbalance_ipc] NT_ExplainError: Code=0x20000013 Error="NT Service is
>>>>> not started"
>>>>> NT_InfoOpen() failed: NT Service is not started
>>>>> 13/Jul/2016 17:21:25 [zbalance_ipc.c:566] ERROR: pfring_zc_open_device
>>>>> error [Socket operation on non-socket] Please check that zc:<xxx> is
>>>>> up and not already used
>>>>> 
>>>>> I get this error when running:
>>>>> sudo  /usr/local/bin/zbalance_ipc -i zc:<xxx> -c 50 -n 2 -m 2 -g 0 -p
>>>>> 
>>>>> which works perfectly fine for 4 other interfaces.  The only
>>>>> difference being that each interface gets assigned its own clusterid.
>>>>> 
>>>>> The box is Supermicro with XL170 NICs running Ubuntu 14.04.
>>>>> 
>>>>> Any thoughts on how I might approach this?
>>>>> 
>>>>> Cheers.
>>>>> _______________________________________________
>>>>> Ntop-misc mailing list
>>>>> [email protected]
>>>>> http://listgateway.unipi.it/mailman/listinfo/ntop-misc
>>>> 
>>>> _______________________________________________
>>>> Ntop-misc mailing list
>>>> [email protected]
>>>> http://listgateway.unipi.it/mailman/listinfo/ntop-misc
>>> _______________________________________________
>>> Ntop-misc mailing list
>>> [email protected]
>>> http://listgateway.unipi.it/mailman/listinfo/ntop-misc
>> 
>> 
>> _______________________________________________
>> Ntop-misc mailing list
>> [email protected]
>> http://listgateway.unipi.it/mailman/listinfo/ntop-misc
> _______________________________________________
> Ntop-misc mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc

Attachment: signature.asc
Description: Message signed with OpenPGP using GPGMail

_______________________________________________
Ntop-misc mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop-misc

Reply via email to