Dear Gurtej,
Sorry, just noticed your second message.
Fri, 7 Oct 2005 13:29:37 -0400, Gurtej Sandhu -> [email protected]:
GS> Network diagram
GS> LOCAL PC ------> (interface 0)router(interface 1)----->remote server
GS> Interface 0 = Ip address 192.168.40.1
GS> Interface 1 = Ip address 192.168.0.1
GS> My router is configured to collect the flows from interface1 being the
GS> source address and destination my flows are bring send to local pc with
GS> ip address 192.168.40.2. Therefore interface 1 is
GS> were all the flows are being collected.
Interface 0 should collect flows instead of interface 1.
GS> Under Netflow conguration -> *Virtual Netflow Interface network
GS> address I typed in the address 192.168.0.1 http://192.168.0.1
You need to type 192.168.40.0/255.255.255.0 or 192.168.40.0/24 here.
GS> Under -m(local subnets) I typed in 192.168.40.0/24
That's OK.
--
With best regards, Alexei Korobkin.
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
