Dear Gurtej Sandhu,
Fri, 7 Oct 2005 09:33:56 -0400, Gurtej Sandhu -> [email protected]:
GS> 1) I am using the ntop web interface. When I click IP-local->router it
GS> say there is no router connected and no ports being used.
I have the same config, and I see nothing there. I think it's OK.
GS> 2) Under Netflow conguration -> *Virtual Netflow Interface network
GS> address, *am I suppost to enter the ip address of the interface of the
GS> router that is sending the flows to the server that has ntop installed.
You're supposed to specify your local subnet there, like
10.100.1.0/255.255.0.0 or 192.168.1.0/255.255.255.0. After that you will get
correct list of remote and local hosts, additional hosts yopu can add
with -m (--local-subnet) switches. Please read the description of this
setting, it is very helpful.
Don't forget to switch NIC to netflow after configuring Netflow interface
(Admin -> Switch NIC).
GS> 3) also I used -m to specify my local subnet from my web interface.
GS> but my local
GS> hosts show up as remote hosts. You know what the problem there could
GS> be. Thanks.
hth.
--
With best regards, Alexei Korobkin.
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
