Ooops, nevermind. Found it. It was set to Interface and Host data only, but set to full.
Fixed, I'll see if that was the culprit. Thanks!!!! ....k -=-=-=- > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Kevin Freels > Sent: Monday, June 09, 2008 12:50 PM > To: [email protected] > Subject: Re: [Ntop] ntop dying with SegFault at line 26 > > Okay, I give up. Where will I find (and set) RRD? > > I reduced the ntop logging to "0", but it's still sucking up > disk space at about 5Gb/hour.... > > Is this configured on the build? I don't remember seeing > anything when I built ntop. > > ....k > -=-=-=- > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf > > Of Gary Gatten > > Sent: Monday, June 09, 2008 9:30 AM > > To: [email protected] > > Subject: Re: [Ntop] ntop dying with SegFault at line 26 > > > > What are your RRD settings? Ie:, hosts, interfaces, > domains, and what > > level of logging? If you have everything enabled and set to full - > > that's a LOT of data. > > > > G > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf > > Of Kevin Freels > > Sent: Monday, June 09, 2008 11:25 AM > > To: [email protected] > > Subject: Re: [Ntop] ntop dying with SegFault at line 26 > > > > Now I have another issue. > > > > The system has been running fine, no un-anticipated exits or > > seg-faults. > > > > > > Well, not quite true... > > > > Now, the system, with almost 50Gb of free disk space is > killing ntop > > because it runs out of disk space. The interface dirs under rrd are > > completely filling up with IP hosts data from all the hosts ntop > > touches. I added the "-x 4096" > > parameter, but that doesn't seem to help. > > We do not have --sticky-hosts set. > > > > So how do I (or can I) limit the amount of disk space ntop uses? > > > > ....k > > -=-=-=- > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > On Behalf > > > Of Kevin Freels > > > Sent: Monday, June 02, 2008 1:42 PM > > > To: [email protected] > > > Subject: Re: [Ntop] ntop dying with SegFault at line 26 > > > > > > Luca, > > > > > > I have started ntop with the CLI you prescribed. Here is > > the history > > > of the commands I had set up in the init.d script (commented-out > > > configs are ones I tried in succession): > > > > > > NTOPBin=/usr/local/bin/ntop > > > #NTOPCfg=" -w 3001 -i eth0,eth1 -M -c -d -t 5" > > > #NTOPCfg=" -w 3001 -i eth0,eth1 -M -c -t 5" > > > #NTOPCfg=" -w 3001 -i eth0 -c -t 5" > > > #NTOPCfg=" -w 3001 -i eth0 -c -t 5 -x 4096" > > > #NTOPCfg=" -w 3001 -i eth0,eth1 -M -z -t 5 -x 4096" > > > NTOPCfg=" -w 3001 -i eth0,eth1 -M -K -z -t 6 -x 4096" > > > > > > Over this last weekend, I limited the hosts hash and > --sticky-hosts > > > with "-x 4096" and dropped the "-c". It ran all weekend > > long until the > > > disk filled up (but not from ntop, another issue). So perhaps the > > > --sticky-hosts and the host hash limits are the trick....? In any > > > event, it seems to be working now. > > > > > > I'll keep an eye on it for the week (or until it crashes). > > If it keeps > > > going, maybe I'll fool around with the host hash limit, > > incrementally > > > raising it. If anything happens to cause it to die, I'll > forward on > > > the gruesome details. > > > > > > Thanks for the reply!!! > > > > > > ....k > > > -=-=-=- > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > > On Behalf > > > > Of Luca Deri > > > > Sent: Sunday, June 01, 2008 12:30 AM > > > > To: [email protected] > > > > Subject: Re: [Ntop] ntop dying with SegFault at line 26 > > > > > > > > Kevin > > > > in what setup are you running ntop? WAN perhaps? What is > > > the exact CLI > > > > command you're using? Can you please start it from shell > > > and add -K -t > > > > 6 and send the log. > > > > > > > > Thanks Luca > > > _______________________________________________ > > > Ntop mailing list > > > [email protected] > > > http://listgateway.unipi.it/mailman/listinfo/ntop > > > > > _______________________________________________ > > Ntop mailing list > > [email protected] > > http://listgateway.unipi.it/mailman/listinfo/ntop > > > > > > > > > > > > <font size="1"> > > <div style='border:none;border-bottom:double windowtext > > 2.25pt;padding:0in 0in 1.0pt 0in'> </div> "This email is > intended to > > be reviewed by only the intended recipient and may contain > > information that is privileged and/or confidential. > > If you are not the intended recipient, you are hereby > notified that > > any review, use, dissemination, disclosure or copying of > this email > > and its attachments, if any, is strictly prohibited. If you have > > received this email in error, please immediately notify the > sender by > > return email and delete this email from your system." > > </font> > > > > _______________________________________________ > > Ntop mailing list > > [email protected] > > http://listgateway.unipi.it/mailman/listinfo/ntop > > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop > _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
