OK. When you look at the scope options for each scope, are they exactly the same for both scopes, modulo option "003 Router"?
If they are, what happens if you remove all of the options (except "003 Router) and set them globally? Kurt On Mon, Feb 27, 2012 at 17:49, N Parr <npar...@mortonind.com> wrote: > They are set per scope. > > > -----Original message----- > > From: Kurt Buff <kurt.b...@gmail.com> > To: NT System Admin Issues <ntsysadmin@lyris.sunbelt-software.com> > Sent: Mon, Feb 27, 2012 18:10:13 CST > Subject: Re: DHCP - I'm at a loss > > On Mon, Feb 27, 2012 at 15:10, N Parr <npar...@mortonind.com> wrote: >> I'm not very hopeful that anyone will have an answer for me about this but >> I've seen stranger things solved. I have two of my scopes set up >> identically. I'm handing out extra options for tftp and vendor specific >> SVP >> server IP for my spectralink/polycom wireless IP phones. New Aruba >> wireless >> system, for what it matters. On one VLAN the phones get the server info > >> they need from DHCP and work perfectly fine. If I switch the VLAN for the >> SSID to the other VLAN the phone doesn't get the extra options it needs. >> It >> gets an IP from the DHCP server but not the SVP address it would seem. I >> spent 2 hours on the phone with Aruba this morning ruling out anything >> wrong >> on that side. All the DHCP helpers are there, I can ping the SVP server >> from a PC attached to the SSID I'm messing with from both VLANs. I've >> reset >> the DHCP service. No event log error's on the DHCP. We even set up a new >> test SSID with no security with the same results. Works from one VLAN, >> not >> from the other. >> Thanks >> Niles > > Are the scope options set globally or per scope? > > Kurt > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to listmana...@lyris.sunbeltsoftware.com > with the body: unsubscribe ntsysadmin > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to listmana...@lyris.sunbeltsoftware.com > with the body: unsubscribe ntsysadmin ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe ntsysadmin