So stupid question time - I disconnected them from the controller card - I assumed since they are mirroed it didn't really matter how they were connected - but as I type this I'm worried I might have shot myself in the foot.... does the order they are connected to the controller matter?
On Tue, Dec 2, 2008 at 4:35 PM, Jon Harris <[EMAIL PROTECTED]> wrote: > But then you have to put in the drivers BEFORE you actually install the > entire hardware but I agree I have had more luck that way. > > Good luck, > > Jon > > On Tue, Dec 2, 2008 at 4:33 PM, Phil Brutsche <[EMAIL PROTECTED]> wrote: >> >> Sometimes yes, sometimes no. It depends entirely on the drive controller. >> >> What is 100% guaranteed to work is to take the *entire* *drive* *array* >> and hook it up into another machine. >> >> Bryan Garmon wrote: >> > I haven't worked with recovering data off of a Mirrored drive so I'm a >> > little nervous here - but what I was hoping that what I could do is >> > unplug one of the 250GB SATA drives from the RAID card, set it as a >> > slave drive on another system running server 2003, turn on the other >> > system and then pull the data off the partition. Will this work for me >> > to recovery the data? >> > >> > Thanks for any input. >> >> -- >> >> Phil Brutsche >> [EMAIL PROTECTED] >> >> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ >> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
