I have two webservers w/ 2008 standard with dual nics.
The nics have two different ips in different subnets (192.168.200.x and 10.10.10.x). I created an NLB and added ip's 192.168.200.20-30 into the cluster. Im using the 10.10.10.x network for the dedicated heartbeat. Internally this works just fine and I can hit the website by its IP on http/https (Im listening to 80/443 in the cluster). >From the firewall this works as well, however from the outside this does *NOT* work. The traffic passes the firewall successfully and is nat'ed to the right IP set but there is no response. I see on the 2008 NICS they all have 0.0.0.0 in them but apparently this is ok? The only thing I can think of is somewhere there is an issue with the NLB seeing the gateway. I only have 1 gateway and each server in the cluster can see the internet. I thought maybe the cluster wasn't setup right so I tried redoing it and just putting 1 server in and had the same result. Anyone seen this? I can't think of what to even look for. I was thinking maybe the different subnet ip's are the problem but I have this working just fine in a 2003 setup just fine with basically the exact same settings. ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
