Is D: formatted NTFS? From: James Hill [mailto:james.h...@superamart.com.au] Sent: Tuesday, February 02, 2010 4:39 PM To: NT System Admin Issues Subject: RE: Windows 2008 - Page file
Haven't seen that one. I know this isn't any help but I have changed the page file to a different drive on and 08 box via the gui and it worked. So as you already know, it should work. From: Jason Gauthier [mailto:jgauth...@lastar.com] Sent: Wednesday, 3 February 2010 7:30 AM To: NT System Admin Issues Subject: Windows 2008 - Page file All, I've hit a road block. I'm trying to set Windows 2008 (x64) to use a page file on the D: drive. However, it just does not seem to want to comply. First, I used the built in GUI tools. I set the C: drive to 800-1024, and the D: drive to 34000. I committed my settings with "Set" and rebooted. After reboot, C: was set to 800, but nothing was changed on D:. I verified in the registry, and the settings are accurate. (Also in the GUI still) I've check drive permissions, but they seem to be in order. So, I removed the page file on D: and I attempted to set it with wmic: wmic.exe pagefileset create name="D:\pagefile.sys" wmic pagefileset where name="D:\\pagefile.sys" set InitialSize=17000,MaximumSize=17000 Both commands came back successful. I rebooted. Nothing on D:, but the GUI and registry setting complement each other. I removed the page file from C: and tried to set it on D: only. After rebooting windows reports that a temporary page file was created. Sure enough. On my C: drive is a page file that is 16G (the equivalent of physical memory) I've tried other drives that I attached as well. Same situation. What is going on here? I appreciate the help. Thanks, Jason ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~