sending to the list for posterity. > On Oct 27, 2016, at 6:43 AM, Raymond Day wrote: > > Thank you. > > Looked like that worked. > > I put your code in /etc/nut/nut.conf just at the end of that file. > > Then did. > > upsdrvctl start > > upsc serverups > > Got this date back: > > battery.charge: 100 > battery.charge.low: 10 > battery.charge.warning: 20 > battery.mfr.date: CPS > battery.runtime: 7650 > battery.runtime.low: 300 > battery.type: PbAcid > battery.voltage: 9.5 > battery.voltage.nominal: 12 > device.mfr: CPS > device.model: SX650G > device.type: ups > driver.name: usbhid-ups > driver.parameter.pollfreq: 30 > driver.parameter.pollinterval: 2 > driver.parameter.port: auto > driver.version: 2.6.4 > driver.version.data: CyberPower HID 0.3 > driver.version.internal: 0.37 > input.transfer.high: 0 > input.transfer.low: 0 > input.voltage: 121.0 > input.voltage.nominal: 120 > output.voltage: 121.0 > ups.beeper.status: enabled > ups.delay.shutdown: 20 > ups.delay.start: 30 > ups.load: 0 > ups.mfr: CPS > ups.model: SX650G > ups.productid: 0501 > ups.realpower.nominal: 375 > ups.status: OL > ups.test.result: No test initiated > ups.timer.shutdown: -60 > ups.timer.start: 0 > ups.vendorid: 0764 > > So looks like it's working Thank you. Were is the page I ask for this > help? This e-mail don't have the link looks like. > > -Raymond Day > > > On 10/26/2016 8:55 AM, Charles Lepple wrote: >> On Oct 18, 2016, at 9:40 AM, Charles Lepple wrote: >>> On Oct 18, 2016, at 9:35 AM, Raymond Day wrote: >>>> How do I run the git one? I guess it's up to date. >>> Don't, for now. There have been a few posts on the mailing list explaining >>> what to pass to ./configure (or ./autogen.sh, which calls configure) to get >>> the Git version to install over the Debian one, but I would recommend >>> getting the .deb version configured properly first. >> Did you get the "Duplicate driver instance detected" error resolved? >> >> After that, if the Debian driver is still not working, here is the configure >> line for nut-2.7.1 in Debian - should work for the Git version as well: >> >> ./configure --includedir=/usr/include --mandir=/usr/share/man \ >> --infodir=/usr/share/info --sysconfdir=/etc/nut --localstatedir=/var \ >> --libexecdir=/usr/lib/nut --srcdir=. --disable-maintainer-mode \ >> --disable-dependency-tracking --disable-silent-rules >> --libdir=/usr/lib/x86_64-linux-gnu \ >> --with-ssl --with-nss --with-cgi --with-dev --enable-static \ >> --with-statepath=/var/run/nut --with-altpidpath=/var/run/nut \ >> --with-drvpath=/lib/nut --with-cgipath=/usr/lib/cgi-bin/nut \ >> --with-htmlpath=/usr/share/nut/www --with-pidpath=/var/run/nut \ >> --datadir=/usr/share/nut >> --with-pkgconfig-dir=/usr/lib/aarch64-linux-gnu/pkgconfig \ >> --with-user=nut --with-group=nut --with-udev-dir=/lib/udev \ >> --with-systemdsystemunitdir=/lib/systemd/system >> >> (if your email client puts that all on one line, remove the "\" characters) >
_______________________________________________ Nut-upsdev mailing list Nut-upsdev@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev