nut-upsdev  

Messages by Thread

• [Nut-upsdev] new variable for battery charge indication? Berge, Matthijs ten
• [Nut-upsdev] R: Nut-upsdev Digest, Vol 152, Issue 5 Elio Parisi
  • Re: [Nut-upsdev] R: Nut-upsdev Digest, Vol 152, Issue 5 Daniele Pezzini
• [Nut-upsdev] UPS CYBERPOWER CP1300EPFCLCD MISSING FROMCOMPATIBILITY LIST Ron J Taylor
  • Re: [Nut-upsdev] UPS CYBERPOWER CP1300EPFCLCD MISSING FROMCOMPATIBILITY LIST Charles Lepple
  • Re: [Nut-upsdev] UPS CYBERPOWER CP1300EPFCLCD MISSING FROMCOMPATIBILITY LIST Ron J Taylor
  • Re: [Nut-upsdev] UPS CYBERPOWER CP1300EPFCLCD MISSING FROMCOMPATIBILITY LIST Charles Lepple
• [Nut-upsdev] Work around for power recycling after shutdown.return - TSSHARA UPS - nutdrv_qx driver - megatec protocol Jairo Rotava
  • Re: [Nut-upsdev] Work around for power recycling after shutdown.return - TSSHARA UPS - nutdrv_qx driver - megatec protocol Daniele Pezzini
  • Re: [Nut-upsdev] Work around for power recycling after shutdown.return - TSSHARA UPS - nutdrv_qx driver - megatec protocol Jairo Rotava
  • Re: [Nut-upsdev] Work around for power recycling after shutdown.return - TSSHARA UPS - nutdrv_qx driver - megatec protocol Jairo Rotava
  • Re: [Nut-upsdev] Work around for power recycling after shutdown.return - TSSHARA UPS - nutdrv_qx driver - megatec protocol Daniele Pezzini
  • Re: [Nut-upsdev] Work around for power recycling after shutdown.return - TSSHARA UPS - nutdrv_qx driver - megatec protocol Jairo Rotava
• [Nut-upsdev] Fwd: [networkupstools/nut] Riello IDG400 wrong values & not powering off (#530) Charles Lepple
  • Re: [Nut-upsdev] [networkupstools/nut] Riello IDG400 wrong values & not powering off (#530) Charles Lepple
  • [Nut-upsdev] R: [networkupstools/nut] Riello IDG400 wrong values & not powering off (#530) Elio Parisi
  • Re: [Nut-upsdev] [networkupstools/nut] Riello IDG400 wrong values & not powering off (#530) Charles Lepple
• [Nut-upsdev] Disrupting UPS hardware Eric S. Raymond
• [Nut-upsdev] [PATCH 0/3] OpenUPS updates Russell King
  • [Nut-upsdev] [PATCH 3/3] OpenUPS: fix current calculations Russell King
  • [Nut-upsdev] [PATCH 2/3] Add generic facility to override HID report descriptor in usbhid-ups Russell King
  • Re: [Nut-upsdev] [PATCH 2/3] Add generic facility to override HID report descriptor in usbhid-ups Charles Lepple
  • Re: [Nut-upsdev] [PATCH 1/3] Skip non-feature HID reports Charles Lepple
  • Re: [Nut-upsdev] [PATCH 1/3] Skip non-feature HID reports Russell King
  • Re: [Nut-upsdev] [PATCH 1/3] Skip non-feature HID reports Charles Lepple
• [Nut-upsdev] HCL Zinto 800 supported by blazer_ser and blazer_usb Guido Schubach
• [Nut-upsdev] No answer from upsrw <ups name> command Vitālijs Hodiko
  • Re: [Nut-upsdev] No answer from upsrw <ups name> command Charles Lepple
  • Re: [Nut-upsdev] No answer from upsrw <ups name> command Charles Lepple
• Re: [Nut-upsdev] [networkupstools/nut] Improve upssched example in documentation (#293) (fwd) Roger Price
• [Nut-upsdev] [HCL] Riello IPG 600 supported by riello_usb / incorrect battery.charge and ups.temperature values Andrés Valdaliso
  • Re: [Nut-upsdev] [HCL] Riello IPG 600 supported by riello_usb / incorrect battery.charge and ups.temperature values Charles Lepple
• Re: [Nut-upsdev] Updating snmp-mib.c with new Cyberpower v2.0 MIB Jim Klimov
  • Re: [Nut-upsdev] Updating snmp-mib.c with new Cyberpower v2.0 MIB Ben Kamen
  • Re: [Nut-upsdev] Updating snmp-mib.c with new Cyberpower v2.0 MIB Jim Klimov
  • Re: [Nut-upsdev] Updating snmp-mib.c with new Cyberpower v2.0 MIB Ben Kamen
  • Re: [Nut-upsdev] Updating snmp-mib.c with new Cyberpower v2.0 MIB Ben Kamen
• [Nut-upsdev] [HCL] CyberPower EC350G supported by usbhid-ups Matt Beisser
  • Re: [Nut-upsdev] [HCL] CyberPower EC350G supported by usbhid-ups Charles Lepple
• [Nut-upsdev] Patch for phoenixcontact modbus driver Spiros Ioannou
  • Re: [Nut-upsdev] Patch for phoenixcontact modbus driver Charles Lepple
  • Re: [Nut-upsdev] Patch for phoenixcontact modbus driver Spiros Ioannou
• [Nut-upsdev] [HCL] Cyber Power UPS LX1500GU supported by driver usbhid-ups Jason Berg
• [Nut-upsdev] CyberPower UPS Omission Jason Berg
  • Re: [Nut-upsdev] CyberPower UPS Omission Charles Lepple
  • Re: [Nut-upsdev] CyberPower UPS Omission Charles Lepple
• [Nut-upsdev] Openups patch proposal Alphonse
  • Re: [Nut-upsdev] Openups patch proposal Charles Lepple
  • Re: [Nut-upsdev] Openups patch proposal Alphonse
  • Re: [Nut-upsdev] Openups patch proposal Charles Lepple
  • Re: [Nut-upsdev] Openups patch proposal Alphonse
  • Re: [Nut-upsdev] Openups patch proposal Charles Lepple
  • Re: [Nut-upsdev] Openups patch proposal Alphonse
  • Re: [Nut-upsdev] Openups patch proposal (KDE, etc.) Charles Lepple
  • Re: [Nut-upsdev] Openups patch proposal (KDE, etc.) Alphonse
• [Nut-upsdev] UPSC dump for Eaton/Powerware 5115 Rackmount unit (driver version 2.7.2) Uwe Sauter
• [Nut-upsdev] Clarification to man upssched.conf Roger Price
  • Re: [Nut-upsdev] Clarification to man upssched.conf Jim Klimov
  • Re: [Nut-upsdev] Clarification to man upssched.conf Roger Price
  • Re: [Nut-upsdev] Clarification to man upssched.conf Jim Klimov
• [Nut-upsdev] New data for the Device Dump List Manuel Wolfshant
• [Nut-upsdev] Proposed new documentation "Configuration Examples" Roger Price
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Charles Lepple
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Tim Dawson
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Roger Price
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Roger Price
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Tim Dawson
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Jim Klimov
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Roger Price
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Roger Price
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Roger Price
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Jim Klimov
  • Re: [Nut-upsdev] Proposed new documentation "Configuration Examples" Roger Price
• [Nut-upsdev] new driver- or vendor-specific variable prefix? Charles Lepple
  • Re: [Nut-upsdev] new driver- or vendor-specific variable prefix? Arnaud Quette
• [Nut-upsdev] Release schedule Spiros Ioannou
  • Re: [Nut-upsdev] Release schedule Jim Klimov
  • Re: [Nut-upsdev] Release schedule Spiros Ioannou
• [Nut-upsdev] Powercom BNT-2000AP(USB) Александр Борисович
  • Re: [Nut-upsdev] Powercom BNT-2000AP(USB) Jim Klimov
  • Re: [Nut-upsdev] Powercom BNT-2000AP(USB) Александр Борисович
  • Re: [Nut-upsdev] Powercom BNT-2000AP(USB) Arnaud Quette
• Re: [Nut-upsdev] Many open green PRs in NUT, wanna merge? Charles Lepple
• [Nut-upsdev] New UPS information - Liebert GXT4 via US Christo Simeonoff
  • Re: [Nut-upsdev] New UPS information - Liebert GXT4 via US Charles Lepple
• [Nut-upsdev] NUT namespace: RFC for new variable addition Arnaud Quette
  • [Nut-upsdev] NUT namespace: RFC for new variable addition Arnaud Quette
  • Re: [Nut-upsdev] NUT namespace: RFC for new variable addition Charles Lepple
  • Re: [Nut-upsdev] NUT namespace: RFC for new variable addition Jim Klimov
  • Re: [Nut-upsdev] NUT namespace: RFC for new variable addition Charles Lepple
  • Re: [Nut-upsdev] NUT namespace: RFC for new variable addition Gernot Zander
  • Re: [Nut-upsdev] NUT namespace: RFC for new variable addition Arnaud Quette
  • Re: [Nut-upsdev] NUT namespace: RFC for new variable addition Jim Klimov
  • [Nut-upsdev] NUT namespace: RFC for new variable addition Arnaud Quette
  • Re: [Nut-upsdev] NUT namespace: RFC for new variable addition Charles Lepple
  • Re: [Nut-upsdev] NUT namespace: RFC for new variable addition Arnaud Quette
  • [Nut-upsdev] NUT namespace: RFC for new variable addition Arnaud Quette
• [Nut-upsdev] [PATCH] Detect correct systemdsystemshutdowndir Stanislav Brabec
• [Nut-upsdev] Allow status name as alternative <notify_type> Roger Price
• [Nut-upsdev] modbus driver for phoenix contact industrial UPS Spiros Ioannou
  • Re: [Nut-upsdev] modbus driver for phoenix contact industrial UPS Charles Lepple
• Re: [Nut-upsdev] [nut-upsuser] Copeland Engineering Dockmaster Charles Lepple
  • Re: [Nut-upsdev] [nut-upsuser] Copeland Engineering Dockmaster Drew from Zhrodague
  • Re: [Nut-upsdev] [nut-upsuser] Copeland Engineering Dockmaster Charles Lepple
  • Re: [Nut-upsdev] [nut-upsuser] Copeland Engineering Dockmaster Charles Lepple
  • Re: [Nut-upsdev] [nut-upsuser] Copeland Engineering Dockmaster Drew from Zhrodague
  • Re: [Nut-upsdev] [nut-upsuser] Copeland Engineering Dockmaster Charles Lepple
• [Nut-upsdev] MIB error Klop, Rody
• [Nut-upsdev] Solar controller? Petr Kubánek
  • Re: [Nut-upsdev] Solar controller? Jim Klimov
• [Nut-upsdev] 2.7.4 make install fails: libnutclient.so.0.0.0 missing Roger Price
  • Re: [Nut-upsdev] 2.7.4 make install fails: libnutclient.so.0.0.0 missing Jim Klimov
  • Re: [Nut-upsdev] 2.7.4 make install fails: libnutclient.so.0.0.0 missing Charles Lepple
• [Nut-upsdev] nut-git reporting 24 Volts with CP1350PFCLCD -- is that correct? David C. Rankin
  • Re: [Nut-upsdev] nut-git reporting 24 Volts with CP1350PFCLCD -- is that correct? Charles Lepple
• [Nut-upsdev] [HCL] CyberPower Cyber Power Systems CP685AVR supported by usbhid-ups Craig STCR
  • Re: [Nut-upsdev] [HCL] CyberPower Cyber Power Systems CP685AVR supported by usbhid-ups Charles Lepple
  • Re: [Nut-upsdev] [HCL] CyberPower Cyber Power Systems CP685AVR supported by usbhid-ups Craig STCR
• [Nut-upsdev] [HCL] <CyberPower> <PR2200LCDRT2U> supported by <snmp-ups> Francois Cukier
  • Re: [Nut-upsdev] [HCL] <CyberPower> <PR2200LCDRT2U> supported by <snmp-ups> Charles Lepple
• [Nut-upsdev] CyberPower SX650G no driver. Raymond Day
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Charles Lepple
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Charles Lepple
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Raymond Day
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Charles Lepple
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Charles Lepple
  • Re: [Nut-upsdev] CyberPower SX650G no driver. [HCL] Charles Lepple
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Raymond Day
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Charles Lepple
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Jim Klimov
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Raymond Day
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Raymond Day
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Raymond Day
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Roger Price
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Raymond Day
  • Re: [Nut-upsdev] CyberPower SX650G no driver. Roger Price
• [Nut-upsdev] driver for Victron Multiplus RS485 Jon 'Boli' Copeland
  • Re: [Nut-upsdev] driver for Victron Multiplus RS485 Charles Lepple
• [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS Matthew Wire
  • [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS Matthew Wire
  • Re: [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS Charles Lepple
  • Re: [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS hyo...@gmail.com
  • Re: [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS Matthew Wire
  • Re: [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS hyo...@gmail.com
  • Re: [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS Charles Lepple
  • Re: [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS hyo...@gmail.com
  • Re: [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS Matthew Wire
  • Re: [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS Raymond Day
  • Re: [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS hyo...@gmail.com
  • Re: [Nut-upsdev] nutdrv-qx powercool 1500VA USB UPS Matthew Wire
• [Nut-upsdev] UPS shutdown Neetish Bhat
  • Re: [Nut-upsdev] UPS shutdown Jim Klimov
• Re: [Nut-upsdev] Proposal for technique to stop a timer at any moment Roger Price
• [Nut-upsdev] Proposal for technique to stop a timer at any moment Roger Price
  • Re: [Nut-upsdev] Proposal for technique to stop a timer at any moment Roger Price
• [Nut-upsdev] reassessing the HCL ratings scale Charles Lepple
• [Nut-upsdev] ./configure excludes USB drivers and documentation Roger Price
  • Re: [Nut-upsdev] ./configure excludes USB drivers and documentation Charles Lepple
• [Nut-upsdev] updating the NUT website Charles Lepple
  • Re: [Nut-upsdev] updating the NUT website hyo...@gmail.com
  • Re: [Nut-upsdev] updating the NUT website Arnaud Quette
  • Re: [Nut-upsdev] updating the NUT website Charles Lepple
  • Re: [Nut-upsdev] updating the NUT website hyo...@gmail.com
  • Re: [Nut-upsdev] updating the NUT website Charles Lepple
  • Re: [Nut-upsdev] updating the NUT website hyo...@gmail.com
  • Re: [Nut-upsdev] updating the NUT website Charles Lepple
• Re: [Nut-upsdev] A lot of EAGAIN (Resource temporarily unavailable) using nutdrv_qx Charles Lepple
• [Nut-upsdev] New driver Carlos Eduardo P. Guidugli
  • Re: [Nut-upsdev] New driver Silvino Benevides Magalhaes
  • Re: [Nut-upsdev] New driver Carlos Eduardo P. Guidugli
• [Nut-upsdev] [HCL] Lyonn ULT-2000 MKR supported by Marcos Martinez
  • Re: [Nut-upsdev] Lyonn ULT-2000 MKR supported by Charles Lepple
  • Re: [Nut-upsdev] Lyonn ULT-2000 MKR supported by Charles Lepple
• [Nut-upsdev] Tripp-Lite SMART1500LCDT Stuart Gathman
  • Re: [Nut-upsdev] Tripp-Lite SMART1500LCDT Charles Lepple
  • Re: [Nut-upsdev] Tripp-Lite SMART1500LCDT Stuart Gathman
  • Re: [Nut-upsdev] Tripp-Lite SMART1500LCDT Marco Walther
  • Re: [Nut-upsdev] Tripp-Lite SMART1500LCDT Stuart D. Gathman
  • Re: [Nut-upsdev] Tripp-Lite SMART1500LCDT Marco Walther
  • Re: [Nut-upsdev] Tripp-Lite SMART1500LCDT Marco Walther
• [Nut-upsdev] A "standard" serial protocol? Rob Groner
  • Re: [Nut-upsdev] A "standard" serial protocol? Thiago Wiezbicki - NHS
  • Re: [Nut-upsdev] A "standard" serial protocol? Rob Groner
• [Nut-upsdev] [PATCH] upsmon: Add NOTIFYMSG to env of NOTIFYCMD nut-upsdev
• [Nut-upsdev] APC AP9630 support AES ? Yu Hong Lin
  • Re: [Nut-upsdev] APC AP9630 support AES ? Tim Rice
• [Nut-upsdev] NUT Windows port sources review Denis Serov
  • Re: [Nut-upsdev] NUT Windows port sources review Charles Lepple
  • Re: [Nut-upsdev] NUT Windows port sources review Denis Serov
• [Nut-upsdev] nut-ipmipsu 2.7.3-2.7.4 crash on ipmi_sdr_ctx_destroy in libfreeipmi_cleanup Zoran Peričić
• [Nut-upsdev] Windows port Denis Serov
  • Re: [Nut-upsdev] Windows port Charles Lepple
  • [Nut-upsdev] How to build NUT Windows Port Denis Serov
• [Nut-upsdev] Countdown to 2.7.4 Charles Lepple
• [Nut-upsdev] Missing MIB Report Dustin Henning
• [Nut-upsdev] UPS Trust OXXTRON 1300VA not working Andreas Cattelan
  • Re: [Nut-upsdev] UPS Trust OXXTRON 1300VA not working Charles Lepple
  • Re: [Nut-upsdev] UPS Trust OXXTRON 1300VA not working Andreas Cattelan
  • Re: [Nut-upsdev] UPS Trust OXXTRON 1300VA not working Andreas Cattelan
  • Re: [Nut-upsdev] UPS Trust OXXTRON 1300VA not working Charles Lepple

• Earlier messages