Hi,
today I have tested the Zinto 800 with blazer_ser and blazer_usb on
Citrix Server 7.0. Both works fine.
upsc-Output (blazer_ser):
battery.charge: 94
battery.voltage: 25.70
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.mfr:
device.model: ZINTO 800
device.type: ups
driver.name: blazer_ser
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS1
driver.version: 2.7.2
driver.version.internal: 1.56
input.current.nominal: 3.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 228.1
input.voltage.fault: 228.1
input.voltage.nominal: 230
output.voltage: 228.2
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: 01986.01
ups.load: 11
ups.mfr:
ups.model: ZINTO 800
ups.status: OL
ups.temperature: 21.0
ups.type: offline / line interactive
The shutdownsequence stops first the VMs an finally we need
shutdown -h +0
Additional in the systemshutdown is
"/usr/lib/systemd/system-shutdown/nutshutdown" needed.
Produtpage: https://www.online-usv.de/de/produkte/z/bilder.php
--
best regards
Guido Schubach
----------------------------------------------------------------------
Dipl.-Ing. Guido Schubach, BRAIN GmbH
Telefon: +49 89 179104-112
Fax: +49 89 179104-212
E-Mail: [email protected]
----------------------------------------------------------------------
BRAIN Gesellschaft für Beratung und Realisierung von
Applikationssoftware, Informationssystemen, Netzwerktechnologien mbH
Geschäftsführer: Wolfgang Rupp, Dr. Herbert Kraxenberger
Sitz und Registergericht: München HRB 92054
----------------------------------------------------------------------
_______________________________________________
Nut-upsdev mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
