I can look into the firmware version reporting where a serial number should, the model number (cosmetically you can probably work around this in the conf files) if you send me a partial serial number (from Date Code to SKU): https://www.tripplite.com/support/identify-products
There should be only one self-test for these models, so that would probably explain the reason no discrete deep-discharge test is supported in Network UPS Tools. Thank you, David Zomaya Tripp Lite ________________________________ From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite....@alioth-lists.debian.net> on behalf of Yogesh Bhanu <yogesh.bh...@gmail.com> Sent: Friday, May 15, 2020 4:13 AM To: nut-upsuser@alioth-lists.debian.net Subject: [EXTERNAL] [Nut-upsuser] NUT -2.7.4 with Tripp Lite SMX1000 LCD on RPI4 runing 64bit ubuntu 20.04 This is an EXTERNAL email. Please take a moment and think before clicking any links or opening any attachments from this email. If suspicious, please forward to ishelpd...@tripplite.com for review. ______________________________________________________________________ Hi, This is a newbie post so please bear with me. After loosing my router to a random Subminute outage. I looked around for a fanless UPS and bought Tripp Lite SMX1000LCD The above constellation works. But I have some questions about outputs. Please see attache nut report for the config. upsc output: --8<-- fourpi01:~# upsc tripp Init SSL without certificate database battery.charge: 100 battery.runtime: 4050 battery.type: PbAc battery.voltage: 13.5 battery.voltage.nominal: 12.0 device.mfr: Tripp Lite device.model: TRIPP LITE UPS device.serial: FW-2473 A device.type: ups driver.name: usbhid-ups driver.parameter.bus: 001 driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 2009 driver.parameter.synchronous: no driver.parameter.vendorid: 09ae driver.version: 2.7.4 driver.version.data: TrippLite HID 0.82 driver.version.internal: 0.41 input.frequency: 49.7 input.voltage: 221.5 input.voltage.nominal: 230 output.frequency.nominal: 50 output.voltage.nominal: 230 ups.beeper.status: disabled ups.delay.shutdown: 20 ups.mfr: Tripp Lite ups.model: TRIPP LITE UPS ups.power.nominal: 1000 ups.productid: 2009 ups.serial: FW-2473 A ups.status: OL ups.test.result: Done and passed ups.timer.reboot: 65535 ups.timer.shutdown: 65535 ups.vendorid: 09ae ups.watchdog.status: 0 -->8-- # Is it possible to fix model name to show the correct modelname i.e. " SMX1000LCD" # Firmware Version is reported as serial number ? # It was possible to do quick battery test but it was not possible to do a deep battery test, Is this feature not supported ? # Is it possible to calculate /estimate how much time is left when on battery ? Thanks in advance, Yogi P.S: https://urldefense.proofpoint.com/v2/url?u=https-3A__networkupstools.org_lists_&d=DwIBaQ&c=f9s1WCuF-N6cmD_YaZ7gBg&r=lhr3k4au5dVQgHY_iS-v_t9g8PHVkn8Px_wyaupZGfQ&m=5y6A9L4rAuyG4tdW5-kFFwi0weD1c62JSDLKxv_RA0A&s=8tzBxX3fvN_wOpE-OPLmk4LU-YrO5F_-TMK-Z-JvTNQ&e= -- returns a 404 ________________________________ This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems and information.
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser