On August 14, 2020 3:46:05 AM GMT+03:00, Todd Benivegna <t...@benivegna.com> wrote: >So I finally got a test in after I changed my RPi to the master and >everything else (including my Synology) to slaves. Before I did that >though, I timed the shutdown of my Synology since it is the slowest >slave to shutdown. It took 40 seconds to shutdown, so I changed >HOSTSYNC in upsmon.conf on the master (“Proton”) to 60. I then did a >test ("sudo upsmon -c fsd”). The slaves shutdown, then eventually the >master, but the Synology never powered down and the UPS powered off >which cut the power to it while it was still on. Anyone know what the >heck is going on? Beside the ups mngmnt software ( after Roger's analysis I refuse to call it "nut" any more) on the Synology being a POS ? Assuming you did configure correctly the client on the Synology, I guess that probably they reimplemented the slave part just as well as the server..
I wonder how difficult it would be to rip off their modifications and revert to a.standard, functional nut. _______________________________________________ Nut-upsuser mailing list Nut-upsuser@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser