2006/6/7, Rodrigo Ventura <[EMAIL PROTECTED]>:
Thanks Arnaud.
Now I'm getting the error::
# cat /etc/ups.conf
[mgeups]
driver = newhidups
port = auto
desc = "MGE UPS at servers room"
# /usr/local/nutups/bin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.3
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
No matching USB/HID UPS found
Driver failed to start (exit status=1)
How can I figure out what's wrong?
the "well known hotplug / udev issue"(TM) ;-)
If you went from source, there is a scripts/hotplug (for hotplug) or
scripts/hotplug-ng (for udev) directory.
Basically, you need a rule telling the hotplugger what it has to do
when you plug the UPS or when the system boot... And this depends on
your distro and its choice, so more info are needed.
Arnaud
--
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
OpenSource Developer - http://arnaud.quette.free.fr/
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
