2007/10/25, Rózsa Gábor <[EMAIL PROTECTED]>: > I'm confused! I make some more settings in upsmon.conf - more NOTIFYFLAG and > restart the hole nut!
I think you meant *w*hole ;-) > Through the cgi it is signaled the ONBATTERY and charge level also indicate > well, when it reaches 30% shutdown procedure starts on boxes - hurra! But > the UPS does not switch off at all:( > OK do you mean with newmge-shut? > I go back to mge-shut! > ... > Yes, I have almost forget! After reboot the charge of batteries (cgi) shows > only 13%! > Are you sure, it is a bug in tzhe driver? I'm not sure to understand! I don't recall the whole thread, but with a shutdown at 30% and a good load, you reach such a restart level... or did I got you wrong? About the bug I found in newmge-shut, iirc I've seen some strange behaviour that would lead to mixing similar vars (like mapping battery.charge on battery.charge.low). newmge-shut is mostly working. but only *mostly*, and that's not enough for production stage! > Thanks for patient considering the time it took me to reply to the various mge users requests recently, I'm not the one who is patient ;-) Arnaud -- Linux / Unix Exprt R&D - MGE Office Protection Systems - http://www.mgeops.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ Free Software Developer - http://arnaud.quette.free.fr/ _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
