> Using "ondelay = 30" in ups.conf I have managed to wait more time after > the line power is back - other question why this so unreliable:( I have > measured time at 16 min upto 32 min (ondelay = 30 should give 30x10sec = 5 > min) - but I do not care it is not so important for me.
This is not what 'ondelay' is meant to do. Please checkout 'man 8 mge-shut' for a description of what the function of this is. > Also using some script to manage start of driver more reliable - I > experienced two times that it is failed from about 40 times of restart. See above. Did you use the suggestion under KNOWN ISSUES? > I decided this because ups with 2x150W lamps could work with inner limit > 30% charge work only once, if charge was at least 95%!? Because of the > communication problems it also could fail on first time . as I experienced > it frequently happend at around when battery is near to his limit. > > After all I will wait for a new, production strong "newmge-shut" driver! I very much doubt that this is going to solve your problems. If your UPS can be connected through USB, I would try that first. Best regards, Arjen -- Eindhoven - The Netherlands Key fingerprint - 66 4E 03 2C 9D B5 CB 9B 7A FE 7E C1 EE 88 BC 57 _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
