"Arjen de Korte" <[EMAIL PROTECTED]> wrote: > It is *very* unlikely that this is going to work. The 'lakeview' > driver is essentially for a contact-closure-over-USB interface. > > As far as I know, the Mustek Powermust 600VA uses the Megatec protocol > over USB. The fact that it is reported to work with the 'megatec' > driver on the RS232 interface is also a strong indication for that. > In that case, the 'megatec_usb' driver would be appropriate. > Unfortunately, neither the 'agiler' nor 'krauler' subdrivers appear > to work for this device (search the archives for this), so we > probably need to write a third subdriver. If you're willing to work > with us, we might do that.
Ok, I'll try to help you if it turns out my UPS is not supported by nut. > Another, much easier way, is to use a serial-to-USB converter that > can be bought for around 10 nowadays. This will provide your system > with a serial interface, so that you can use the RS232 interface with > the 'megatec' driver. > > Best regards, Arjen -- Best wishes Krzysztof Sasiak _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser