On Wed, 21 Nov 2007 14:27:18 +0300, Arjen de Korte <[EMAIL PROTECTED]> wrote:
>> >> Please, try this off-tree patch: >> http://probu.nl/~p.v.valderen/lakeview.v2.patch >> or an updated version below with resolved conflicts with the >> current trunk. >> The driver name is 'lakeview_usb'. > > It is *very* unlikely that this is going to work. The 'lakeview' driver > is > essentially for a contact-closure-over-USB interface. > > As far as I know, the Mustek Powermust 600VA uses the Megatec protocol > over USB. The fact that it is reported to work with the 'megatec' driver > on the RS232 interface is also a strong indication for that. In that > case, > the 'megatec_usb' driver would be appropriate. Unfortunately, neither the > 'agiler' nor 'krauler' subdrivers appear to work for this device (search > the archives for this), so we probably need to write a third subdriver. > If > you're willing to work with us, we might do that. > > Another, much easier way, is to use a serial-to-USB converter that can be > bought for around € 10 nowadays. This will provide your system with a > serial interface, so that you can use the RS232 interface with the > 'megatec' driver. > > Best regards, Arjen Oops, you are right indeed... -- Alexander _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser