Hi All, I am a newcomer to Nut, so firstly hello :-)
I am keen to implement Nut and have been digging around most of the day to see how to get my two Unitek 1250xD UPS devices working. I have now managed to get nut installed (from source 2.2.0) and have (I think) success. I found a post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-December/003573.html which was discussing the issue with the megatec_usb driver detecting the ups.status as OFF instead of OL or OB. With the patch now applied I get the following: battery.charge: 67.2 battery.voltage: 25.20 battery.voltage.nominal: 23.5 driver.flag.ignoreoff: enabled driver.name: megatec_usb driver.parameter.bus: 003 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 0000 driver.parameter.vendorid: 0001 driver.version: 2.2.1- driver.version.internal: 1.5.9 input.frequency: 50.0 input.voltage: 229.0 input.voltage.fault: 165.0 input.voltage.maximum: 234.0 input.voltage.minimum: 226.0 output.voltage: 229.0 output.voltage.nominal: 230.0 ups.beeper.status: disabled ups.delay.shutdown: 0 ups.delay.start: 2 ups.load: 0.0 ups.mfr: UNITEK ups.model: ALPHA1250 VER2.0C ups.serial: unknown ups.status: OL ups.temperature: 0.0 Which is great, I am assuming this is the desired output. My question is, will this patch become a main part of nut ? what does the ignoreoff option do to the driver in terms of usage ? i.e will nut still work as anticipated ? (Posted to both users and dev as it fits in both camps) Kind Regards Matt Brown _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser