Hi I've got a UPS branded as a Dynamix UPS-650VA. I used NUT v2.0 with it and tried various drivers the ippon one seemed to work best. Now with 2.2.1 it only works with the megatec driver and while it seems to work well, the status always shows OFF. upsc reports the following.
> battery.charge: 100.0 > battery.voltage: 12.70 > battery.voltage.nominal: 11.5 > driver.name: megatec > driver.parameter.battvolts: 4:12 > driver.parameter.pollinterval: 2 > driver.parameter.port: /dev/ttyS0 > driver.version: 2.2.1- > driver.version.internal: 1.5.13 > input.frequency: 50.2 > input.voltage: 234.0 > input.voltage.fault: 165.0 > input.voltage.maximum: 235.0 > input.voltage.minimum: 234.0 > output.voltage: 234.0 > output.voltage.nominal: 240.0 > ups.beeper.status: disabled > ups.delay.shutdown: 0 > ups.delay.start: 2 > ups.load: 0.0 > ups.mfr: KEBO > ups.model: UPS-650VA VER7.00 > ups.serial: unknown > ups.status: OFF > ups.temperature: 0.0 Temp reading also doesn't work and beep status just says disabled. Other readings seem plausible. If anybody knows anything about this UPS and how to fix the status, temp beep status etc, I would be happy to collaborate with them in writing/testing any modifications to the driver. Best Regards, Peter McKenna
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
