Arnaud Quette wrote:
both with and without your change applied.
Arnaud
Hi Arnaud,
Unfortunately I get the same result with and without the change.
[r...@smoke nut-2.4.1]# /usr/bin/apcsmart -DDD -a wnAPC3
Network UPS Tools - APC Smart protocol driver 2.00 (2.4.1)
APC command table version 2.0
debug level is '3'
Unable to detect an APC Smart protocol UPS on port /dev/ttyS0
Check the cabling, port name or model name and try again
Perhaps there is an issue with the serial port, although it appears to
be OK - I'll look further.
I have tested the UPS using Hyperterminal on a Windows laptop and it
definitely only communicated at 9600 (as mentioned in the UPS docs).
Regards,
Richard
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser