I am currently trying to use your NUT program to monitor a SMART3000RMOD2U TRIPP LITE device. I find that it connects with the in the device folder as hiddev0 and if I connect a second device it connects under hiddev1. I attempted to use your software with the driver=usbhid-ups and port=auto, but when I try to discover it it can't be found. Then when I run the command /sbin/usbhid-ups -a ups1 -D where ups1 described the driver and port combination, I get the following output:
This Tripp Lite device (09ae/3014) is not (yet) supported by usbhid-ups. Please make sure you have an up-to-date version of NUT. If this does not fix the problem, try to tun the driver with the '-x productid=3014' option. If this fails, try the tripplite_usb driver. Please report your results to the NUT user's mailing list <[email protected]> I tried both the other combinatioins, but neither can detect anything. When I place the -x productid=3014 it doesn't detect the tripplite devices, and the same happens when I try the commnad: /sbin/tripplite_usb -a ups1 Do you have any suggestions, or is this going to be a device that has an updated driver in the future? Thanks Josh Williams Zeta Associates Inc. 1(703)272-9665 _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
