Hi, I have two identical UPS's on USB bus. The original machine I was going to use for UPS monitoring only had had USB bus, so these two UPS's were seen like that:
Bus 001 Device 009: ID 14f0:00c9 Bus 001 Device 007: ID 14f0:00c9 There was no description on the right side either. If I used the 'verbose' flag, both UPS's had the exact same output... I since replaced the machine and used one with two USB buses, so my problem is fixed... But if I couldn't do that, is there any way to distinguish between the two in 'ups.conf'? Danilo PS: Since I have about an hour of battery running time and a generator, the plan is not to shutdown any machine, but to manually start the generator. That's why I have just one hosts monitoring both UPS's and alerting the responsible person via SMS / GSM. _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser