Hi, Charles!
On my board:
# /usr/local/ups/bin/usbhid-ups -a APC_SMT_USB -DDD
Network UPS Tools - Generic HID driver 0.35 (2.6.3)
USB communication driver 0.31
0.000000 debug level is '3'
0.007846 upsdrv_initups...
0.008253 No appropriate HID device found
0.008335 No matching HID UPS found
Another information: I tried installing NUT on my host PC (with Redhat).
The configurations are the same except for using gcc instead of cross
compiling. Still neither UPS is recognized. But this time it printed a lot and
the program seemed endless.
Part of the message is attched.
Best Regards
--
Andrew Chang
2012-03-08
At 2012-03-08 11:55:07,"Charles Lepple" <[email protected]> wrote:
>On Mar 7, 2012, at 9:19 PM, Andrew Min Chang wrote:
>
>> Bus 001 Device 004: ID 051d:0002
>> Bus 001 Device 005: ID 0764:0501
>
>Both of these IDs should be supported.
>
>Can you start the driver in debug mode?
>
>/usr/local/ups/bin/usbhid-ups -a APC_SMT_USB -DDD
>
>(path may vary)
>
>--
>Charles Lepple
>
>A: Because it messes up the order in which people normally read text.
>Q: Why is top-posting such a bad thing?
>A: Top-posting.
>Q: What is the most annoying thing on usenet and in e-mail?
>
test.tar.gz
Description: GNU Zip compressed data
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
