dmesg: Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 18:15:35 EST 2011 root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2400.10-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Family = 6 Model = f Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 3222274048 (3073 MB) avail memory = 3088437248 (2945 MB) ACPI APIC Table: <COMPAQ GLENWOOD> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling wlan: mac acl policy registered ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e10, 0) error 1 wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548d0, 0) error 1 ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cd0, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d70, 0) error 1 kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard padlock0: No ACE support. acpi0: <HPQOEM SLIC-WKS> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xe4000000-0xe4ffffff,0xc0000000-0xdfffffff,0xe2000000-0xe3ffffff irq 16 at device 0.0 on pci1 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci16: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1000-0x101f mem 0xe0400000-0xe041ffff,0xe0420000-0xe043ffff irq 16 at device 0.0 on pci16 em0: Using an MSI interrupt em0: [FILTER] em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1020-0x103f mem 0xe0440000-0xe045ffff,0xe0460000-0xe047ffff irq 17 at device 0.1 on pci16 em1: Using an MSI interrupt em1: [FILTER] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci40: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci63: <ACPI PCI bus> on pcib4 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a002> mem 0xe0500000-0xe050ffff irq 17 at device 0.0 on pci63 miibus0: <MII bus> on bge0 brgphy0: <BCM5755 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: [FILTER] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3000-0x301f irq 20 at device 29.0 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3020-0x303f irq 18 at device 29.1 on pci0 uhci1: [ITHREAD] usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 21 at device 29.2 on pci0 uhci2: [ITHREAD] usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3060-0x307f irq 22 at device 29.3 on pci0 uhci3: [ITHREAD] usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0a04000-0xe0a043ff irq 20 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af irq 17 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] atapci1: <Intel ICH7 SATA300 controller> port 0x30d0-0x30d7,0x30e8-0x30eb,0x30d8-0x30df,0x30ec-0x30ef,0x30b0-0x30bf mem 0xe0a04400-0xe0a047ff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI called from vendor specific driver atapci1: AHCI v1.10 controller with 4 3Gbps ports, PM not supported ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci1 ata5: [ITHREAD] acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/13 bytes threshold ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] orm0: <ISA Option ROM> at iomem 0xe7800-0xeffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered acd0: DVDROM <LITE-ON DVD SOHD-16P9S/FQSD> at ata0-master UDMA40 ad4: 114473MB <WDC WD1200JD-00HBB0 08.02D08> at ata2-master UDMA100 SATA 1.5Gb/s SMP: AP CPU #1 Launched! Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/ad4s1a WARNING: / was not properly dismounted WARNING: R/W mount of / denied. Filesystem is not clean - run fsck pflog0: promiscuous mode enabled bge0: link state changed to UP em0: link state changed to UP ugen0.2: <American Power Conversion> at usbus0 uhid0: <American Power Conversion Smart-UPS C 1000 FW:UPS 02.2 / ID=1000, class 0/0, rev 2.00/1.06, addr 2> on usbus0
usbconfig: ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.2: <Smart-UPS C 1000 FW:UPS 02.2 / ID=1000 American Power Conversion> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ----- Original Message ----- From: "Daniel O'Connor" <docon...@gsoft.com.au> To: cmb...@comcast.net Cc: "Charles Lepple" <clep...@gmail.com>, "nut-upsuser" <nut-upsuser@lists.alioth.debian.org> Sent: Thursday, September 6, 2012 8:45:10 AM Subject: Re: [Nut-upsuser] APC Smart UPS C1000 On 06/09/2012, at 22:06, cmb...@comcast.net wrote: > Is that what you are looking for? I'm not sure what you mean by usbconfig, I > don't see any logs for NUT on pfSense. Login via SSH. Run 'dmesg' and 'usbconfig' and post the results here. > > > > > From: "Daniel O'Connor" <docon...@gsoft.com.au> > To: cmb...@comcast.net > Cc: "Charles Lepple" <clep...@gmail.com>, "nut-upsuser" > <nut-upsuser@lists.alioth.debian.org> > Sent: Wednesday, September 5, 2012 6:47:40 PM > Subject: Re: [Nut-upsuser] APC Smart UPS C1000 > > > On 05/09/2012, at 23:58, cmb...@comcast.net wrote: > > 1. Does it show up in dmesg, or when you run usbconfig? (pfsense is based > > on FreeBSD right?) > > > > 2. What version of NUT do you have installed? > > > > Running 'upsc -h' should show the version, eg.. > > [midget 10:55] ~ >upsc -h > > Network UPS Tools upsc 2.6.4-Unversioned directory > > > > usage: upsc -l | -L [<hostname>[:port]] > > <snip> > > > > > > My Response Was: > > 1. The only thing that shows up is when I enable it, it sends a broadcasted > > message saying that it can't find the UPS. > > 2. On pfSense, the versions of the packages are listed. This is the version > > on mine. Version 2.2.2_5 pkg 1.4. > > [2.0.1-RELEASE][ad...@host.domain.org]/root(2): upsc -h > > Network UPS Tools upsc 2.2.2 > > > > Where do you see the other two questions? And which one of these did I not > > answer right? > > I asked if pfSense was FreeBSD based, you said OpenBSD but it's really based > on FreeBSD (and it makes a difference especially for USB related matters). > > Can you paste the output of dmesg and usbconfig with the UPS connected > please? > > -- > Daniel O'Connor software and network engineer > for Genesis Software - http://www.gsoft.com.au > "The nice thing about standards is that there > are so many of them to choose from." > -- Andrew Tanenbaum > GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser