Hi all ! I have a little problem using NUT from FreeNAS. Operating system
FreeBSD 8.3-RELEASE-p4 (FreeNAS 8.3.0 BETA 2) UPS American Power Conversion/Back-UPS CS 650 FW:817.v7 .I USB FW:v7 NUT Driver Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 Trying to configure the UPS from FreeNAS failed so I try to investigate which is the problem. Running "usr/local/libexec/nut/usbhid-ups -a SAI" I get this: Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 Using subdriver: APC HID 0.95 libusb_get_report: Unknown error Can't initialize data from HID UPS With -DD to get more information I found the problem: 0.723737 Path: UPS.Battery.ff860018, Type: Feature, ReportID: 0x48, Offset: 0, Size: 32, Value: 0 0.726114 Path: UPS.Input.Voltage, Type: Feature, ReportID: 0x20, Offset: 0, Size: 32, Value: 242 0.728599 libusb_get_report: Unknown error 0.728715 Can't retrieve Report 46: Input/output error 0.728739 Path: UPS.Input.ConfigVoltage, Type: Feature, ReportID: 0x46, Offset: 0, Size: 8 0.731236 Path: UPS.Input.APCLineFailCause, Type: Feature, ReportID: 0x21, Offset: 0, Size: 8, Value: 8 Every time I run the driver I get the same "Can't retrieve Report 46: Input/output error." Any thougths ? Any possible workaround to bypass ReportID 0x46 ? Anybody with the same UPS working nicely with NUT ?
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
