I try to put up a virtual system with FreeBSD to make the build, but this will be slowly because I don't use FreeBSD and I'm starting from zero. Anyway your patch seems appropiate for my problem, thanks to share.
Xavier 2012/9/13 <[email protected]> > Hello Xavier, > > This issue seems very similar to another issue resolved a few days ago for > Back-UPS ES. > > Is it possible for you to get NUT source code ( svn co svn:// > anonscm.debian.org/nut/trunk ) then apply the attached patch and compile > it ? > Then you could test the resulting binary and report back if it works for > you. > > Regards, > Fred > > -- > Eaton Opensource Team - http://opensource.eaton.com > > > > ----------------------------- > > ----------------------------- > > ________________________________________ > From: > nut-upsuser-bounces+fredericbohe=eaton....@lists.alioth.debian.org[nut-upsuser-bounces+fredericbohe= > [email protected]] on behalf of Xavier Garcia [ > [email protected]] > Sent: Wednesday, September 12, 2012 9:00 PM > To: [email protected] > Subject: [Nut-upsuser] Problem with APC Back-UPS CS 650 and FreeNAS 8.3.0 > BETA 2 > > Hi all ! > I have a little problem using NUT from FreeNAS. > > Operating system > > FreeBSD 8.3-RELEASE-p4 (FreeNAS 8.3.0 BETA 2) > > UPS > > American Power Conversion/Back-UPS CS 650 FW:817.v7 .I USB FW:v7 > > NUT Driver > > Network UPS Tools - Generic HID driver 0.37 (2.6.5) > USB communication driver 0.31 > > Trying to configure the UPS from FreeNAS failed so I try to investigate > which is the problem. > > Running "usr/local/libexec/nut/usbhid-ups -a SAI" I get this: > > Network UPS Tools - Generic HID driver 0.37 (2.6.5) > USB communication driver 0.31 > Using subdriver: APC HID 0.95 > libusb_get_report: Unknown error > Can't initialize data from HID UPS > > With -DD to get more information I found the problem: > > 0.723737 Path: UPS.Battery.ff860018, Type: Feature, ReportID: 0x48, > Offset: 0, Size: 32, Value: 0 > 0.726114 Path: UPS.Input.Voltage, Type: Feature, ReportID: 0x20, > Offset: 0, Size: 32, Value: 242 > 0.728599 libusb_get_report: Unknown error > 0.728715 Can't retrieve Report 46: Input/output error > 0.728739 Path: UPS.Input.ConfigVoltage, Type: Feature, ReportID: 0x46, > Offset: 0, Size: 8 > 0.731236 Path: UPS.Input.APCLineFailCause, Type: Feature, ReportID: > 0x21, Offset: 0, Size: 8, Value: 8 > > Every time I run the driver I get the same "Can't retrieve Report 46: > Input/output error." > > Any thougths ? > Any possible workaround to bypass ReportID 0x46 ? > Anybody with the same UPS working nicely with NUT ? > > >
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
