Sorry guys,
I'm leaving for 10 days tomorrow.
I let you know on my way back.
Martin
Le 24/10/12 23:10, Arnaud Quette a écrit :
2012/10/21 Ivo Karabojkov <karaboj...@kit.bg <mailto:karaboj...@kit.bg>>
Hi, Arnaud!
Hi Ivo,
As my ESV8+ woprks now I produced two debug outputs - before and
after applying the patch.
both outputs shows that everything is fine, which is not fully
satisfactory to me.
In the next few days I'll do my best to send outputs with Pulsar
ES11 and EL.
I remember with the original (non-patched) driver ES11 didn't work
well and driver issued messages "could not get multtiplier table,
using raw readings".
I've seen your further post. the msg you mention is nothing but normal.
what is (was) not is the behavior your unit had previously, and the
fact that the driver was not recovering.
I suspect that it was in echo mode. i.e, the unit once only received a
single "Z"
the patch can only improve the situation, since it's back near to the
previous implementation (at least for the ZZ), and more complying to
the UTalk spec (WRT timing).
that said, I would still like to hear from Martin and his ESV8 (not a +).
cheers,
Arnaud
--
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.fr
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
