Hi!
Is there a way to tell upsd to initiate a shutdown sequence (i.e. run SHUTDOWNCMD) immediately after losing line power and switching the state to OB? I'm using an old battery and by the time it reaches LB state, it's already too late for a clean shutdown. Another solution would be to change the LB percentage. It currently reads (upsc): battery.charge.low: 10 Is there a way to raise that to, say, 40 or 50 percent? The goal is to initiate she shutdown procedure as soon after losing line power as possible. Thanks! -- - - - - - Stoycho Ganev Linux Administrator EPAY JSC 16 Ivan Vazov st., fl.4 Sofia 1000 UIC: 131409398 tel: (+359 2) 921 08 50 fax: (+359 2) 987 91 31 s.ga...@datamax.bg https://www.epay.bg [1] Please do not print this e-mail unless you really need to! This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. Links: ------ [1] https://www.epay.bg/
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser