On 10/14/2015 12:18 PM, Roger Price wrote:
Is there any command in the list provided by "upscmd -l myups" which is accepted
by this UPS?
None of the command sin the list successfully completes, not even beeper.toggle.
My list:
# upscmd -l myups
Instant commands supported on UPS [myups]:
beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test
I added -q and -D to /etc/nut/ups.conf, as:
[myups]
driver = nutdrv_qx -D -q
port = auto
I couldn't find more info on where to append driver parameters, not sure if
that's the correct way. After that, I restarted nut with:
# service nut-server restart
# service nut-client restart
Now, issuing any command, such as
upscmd -u admin -p mypass myups load.off
returns "OK" on console, but /var/log/syslog logs:
Oct 14 15:30:52 debianBunker upsd[2976]: Instant command: admin@127.0.0.1 did
load.off on myups
Oct 14 15:30:52 debianBunker nutdrv_qx[2951]: instcmd(load.off, [NULL])
Oct 14 15:30:52 debianBunker nutdrv_qx[2951]: instcmd: FAILED
-- Davide
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
