MX150 will handle a few full tables no problem, now if it only had more than one power supply…. It is a very attractive price for what you get however.
From: nznog-boun...@list.waikato.ac.nz <nznog-boun...@list.waikato.ac.nz> On Behalf Of Phil Snowdon Sent: Friday, 9 August 2019 11:17 AM To: nznog@list.waikato.ac.nz Subject: [nznog] 2019 BGP router recommendations Hi All, Looking for some recommendations for BGP edge routers. Have used Juniper devices for years, but interested to hear what else may be out there. Requirement is just to shift packets and multihome to a few upstream transit providers with full routing tables and several peering partners with more limited route table sizes. Traffic volumes in the gigs to low 10's of gigs. I seem to be getting into a situation where the high end boxes to cope with routing table sizes are overkill in terms of features and performance (and price). But match performance and there's not enough memory to run the BGP. Prefer a supported vendor device rather than roll your own open source solution. Thanks Phil
_______________________________________________ NZNOG mailing list NZNOG@list.waikato.ac.nz https://list.waikato.ac.nz/mailman/listinfo/nznog