Fellow Ole Truckers:
I am getting ready to start the process of work on the front end of my '56
Chevy
3100. One item of attention, is the tie rod and ends. I will be replacing
with
the new style tie rod ends. I have read the various tech articles and it seems
pretty straight forward. Grind off the peening, drill hole in center and drive
out old ball stud. Will see how easy or hard it really is.
Just seeking any do's / dont's or tips on the process before I dive into it.
Thanks again for any input.
Kent S Butler
'56 Chevy 3100
Houston, TX
[Non-text portions of this message have been removed]
------------------------------------
Ole Chevy and GMC trucks rule!
To unsubscribe, send an email (with no subject, no body, just the email), to:
old-chevy-truck-unsubscr...@yahoogroups.comyahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/old-chevy-truck/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/old-chevy-truck/join
(Yahoo! ID required)
<*> To change settings via email:
old-chevy-truck-dig...@yahoogroups.com
old-chevy-truck-fullfeatu...@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
old-chevy-truck-unsubscr...@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
