No....you will have to pull the trans first then egine will be able to come
out.
On Tue, Sep 6, 2011 at 6:57 PM, ken <whetstone.retr...@yahoo.com> wrote:
> **
>
>
> Hi gang.
> Getting ready to pull the engine from my 52 half ton. It came with
> a transplanted 235 (1959) and a granny 4sp replacing the orig. 3 sp.
>
> I am being told to pull engine and tranny as a unit. It doesn't look like
> the tranny would clear the cross member the rear engine motor mounts are
> bolted to. As you know that 4sp is big and it hangs down several inches
> below and behind the cross member.
> I am not going to modify anything so I will be using the old tranny ( and
> the engine if salvageable)
>
> My question is--can that 4sp box clear that cross member??
> AS alway thanks a bunch for all your input and expertise.
> Thanks, KEn
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Ole Chevy and GMC trucks rule!
To unsubscribe, send an email (with no subject, no body, just the email), to:
old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/old-chevy-truck/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/old-chevy-truck/join
(Yahoo! ID required)
<*> To change settings via email:
old-chevy-truck-dig...@yahoogroups.com
old-chevy-truck-fullfeatu...@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
old-chevy-truck-unsubscr...@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
