Ron,
I hate spam, doen't even taste good.
Mike
----- Original Message -----
From: "77w30" <[EMAIL PROTECTED]>
To: <oldsmobile@chebucto.ns.ca>
Sent: Sunday, October 22, 2006 8:49 PM
Subject: RE: 1969 cutlass head liner and qtr glass seals
THANKS MIKE SOME HOW THIS WOUND UP IN SPAM FOLDER
RON
rodney fama OCA #033098
1969 cutlass s
1969 442 north carolinia car
1969 442 cali car. assembly required stay away from www.calicars.cc what
a
hassle.
1972 cutlass convertable
1976 phx y-76 arizona regional car. assy. required
1977 cutlass supreme (3)
1986 honda shadow vt 1100c cruiser
1987 cutlass supreme
1989 chevy k-2500 4*4 pick up
1991 yamaha warrior atv
1994 chevy caprice 9c-1 police pkg
732-986-6388 cell
732-254-9500 wk 2 pm best time to call week days
web site. shows disc brake conversion using 79 trans am rear disc on my 77
cutlass,and my 77 restoration project, along with other toys
http://home.comcast.net/~77w30442/wsb/html/view.cgi-contact.html-.html
http://home.comcast.net/~77w30442/wsb/html/view.cgi-photos.html-MerchantID-2
21197-Publish-t-makestatic-true-skip-45.html
you may have to copy and paste the address to web browser.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mark Mullins
Sent: Saturday, October 14, 2006 11:18 PM
To: 77w30; Olds List
Subject: Re: 1969 cutlass head liner and qtr glass seals
How much of a pain is it to replace the head liner and the rear qtr glass
seals.
On my 69 cutlass s 2 dr hard top
Thanks in advance
ron
Ron,
Headliner is really no problem, though it was time consuming for me in my
'68.
Make sure that what they send you (despite what you order) is the correct
headliner. For '68, they had a choice of 5 or 6 bows in the headliner,
and
mine was originally wrong... Just a warning to double check yours.
I actually spent 4 days installing my headliner. Removed old headliner,
sorted out bow numbers, reinstall, just with the bows. I started from the
front. Apply headliner glue (rubber cement) and clamp with those larger
clamp type paper clips. I used them every couple of inches. After the
glue
dried (I allowed 1 day for each edge) I did each side, then the final
stretch
on the rear edge.
Let me know on the 1/4 glass seals (I assume you're talking about the
leading
edge.) This is on my list of things to do.
M
--
Mark Mullins
Tucson, AZ
