Testet with Virtualbox build 2960

install works .. not well, but works *s*
the boot can be make more better ,
i want indicate -> journal start and stops again and start ?? on systemd .. *g*
need of improvement .. for faster booting up to X  .. :)

so, now i test it on an intel single core 64bit .. 80Gig/nvidia Fx 8600  :)

best regards
Blacky

Am 17.03.2014 17:03, schrieb Blackcrack:
Ciao Davide,

you don't need to "plymouth.enable=0" , easy twice or 3th ESC-Key,
the escape key pressing and the plymouth go away .. try it out..

so, now i try it out also in 2 Systems, an vbox and on intel-singlecore64bit
with changable hard disks slots  :)

now download the iso :)
best regards
Blacky

Am 17.03.2014 15:36, schrieb [email protected]:

Thanks, i have tested build 2960 on two real systems (64bit)

https://drive.google.com/file/d/0B6QC6kfs4JvUU0FoLTM0dk56VVE/edit?usp=sharing

better, but we still need plymouth.enable=0 and i have problem with system who have nvidia video cards.

Still problem with nvidia proprietary driver.

regards

---

Davide_01
http://www.linux-corner.it

Il 2014-03-17 13:45 Blackcrack ha scritto:

Hi Davide,

take a look :
https://abf.io/platforms/openmandriva2014.0/products/

the last who we was tested was the 2951 <https://abf.io/platforms/openmandriva2014.0/products/70/product_build_lists/2951> <- this has not boot in Vbox

now it is a 2960 (Build complete) build there.. but in 15min i be with my dad on an beer
in the near City for drinking a beer and walk around,
but later in an couple howers want testing the 2960 too :)

so many fun :)

best regards
Blacky

Am 17.03.2014 13:13, schrieb [email protected]:

    There is a forecast for a new ISO?


    I can not do any testing, on all systems I am not able to
    perform a clean installation, or get to a desktop.

    I'm going to wait next iso.

    
https://drive.google.com/file/d/0B6QC6kfs4JvUU0FoLTM0dk56VVE/edit?usp=sharing

    Thank you.

    ---

    Davide_01
    http://www.linux-corner.it

    Il 2014-03-16 23:42 Colin Close ha scritto:

        Hi All
        plymouth.enable=0 works for me too.
        Plymouth is currently being updated
        Best,
        Colin

        Colin Close
        QA Team

        On Sunday 16 Mar 2014 22:57:32 Tomasz Pawe? Gajc wrote:

            Dnia niedziela, 16 marca 2014 22:30:48 luca pedrielli
            pisze:

                >> Please do the tesing, and fill DETAILED
                bugreports on >> issues.openmandriva.org how can i
                provide a DETAILED bugreports? in debug mode
                messages scroll and i have no console access

            In my case adding plymouth.enable=0 in boot parameters
            does the trick and system boots Please try it















Reply via email to