Blacky,
In case you are not monitoring the lists try removing all references to 
init=/lib/systemd/systemd from grub.cfg this should sort out the plymouth 
lockup.
Best,
Colin
 
On Monday 17 Mar 2014 18:46:26 Blackcrack wrote:
> 
> Am 17.03.2014 18:08, schrieb Blackcrack:
> 
> Testet now with an AMD 2x Core 64bit 6000+ / 4Gig Ram
>   80Gig/nvidia Fx 8600  :) OMLX build 2960
> 
> Installer works so far.
> System reboot with the Installed System:
> 
> System stops behind :
> [OK] Startet config read-only root support
> _ <-blink
> <stop>
> 
> :\
> so not boot on real hardware ..
> best regards
> Blacky
> 
> >
> > install works .. not well, but works *s*
> > the boot can be make more better ,
> > i want indicate ->  journal start and stops again and start ?? on 
> > systemd .. *g*
> > need of improvement .. for faster booting up to X  .. :)
> >
> > so, now i test it on an intel single core 64bit .. 80Gig/nvidia Fx 
> > 8600  :)
> >
> > best regards
> > Blacky
> >
> > Am 17.03.2014 17:03, schrieb Blackcrack:
> >> Ciao Davide,
> >>
> >> you don't need to "plymouth.enable=0" , easy twice or 3th ESC-Key,
> >> the escape key pressing and the plymouth go away .. try it out..
> >>
> >> so, now i try it out also in 2 Systems, an vbox and on 
> >> intel-singlecore64bit
> >> with changable hard disks slots  :)
> >>
> >> now download the iso :)
> >> best regards
> >> Blacky
> >>
> >> Am 17.03.2014 15:36, schrieb [email protected]:
> >>>
> >>> Thanks, i have tested build 2960 on two real systems (64bit)
> >>>
> >>> https://drive.google.com/file/d/0B6QC6kfs4JvUU0FoLTM0dk56VVE/edit?usp=sharing
> >>>
> >>> better, but we still need plymouth.enable=0 and i have problem with 
> >>> system who have nvidia video cards.
> >>>
> >>> Still problem with nvidia proprietary driver.
> >>>
> >>> regards
> >>>
> >>> ---
> >>>
> >>> Davide_01
> >>> http://www.linux-corner.it
> >>>
> >>> Il 2014-03-17 13:45 Blackcrack ha scritto:
> >>>
> >>>> Hi Davide,
> >>>>
> >>>> take a look :
> >>>> https://abf.io/platforms/openmandriva2014.0/products/
> >>>>
> >>>> the last who we was tested was the 2951 
> >>>> <https://abf.io/platforms/openmandriva2014.0/products/70/product_build_lists/2951>
> >>>>  
> >>>> <- this has not boot in Vbox
> >>>>
> >>>> now it is a 2960 (Build complete) build there.. but in 15min i be 
> >>>> with my dad on an beer
> >>>> in the near City for drinking a beer and walk around,
> >>>> but later in an couple howers want testing the 2960 too :)
> >>>>
> >>>> so many fun :)
> >>>>
> >>>> best regards
> >>>> Blacky
> >>>>
> >>>> Am 17.03.2014 13:13, schrieb [email protected]:
> >>>>
> >>>>     There is a forecast for a new ISO?
> >>>>
> >>>>
> >>>>     I can not do any testing, on all systems I am not able to
> >>>>     perform a clean installation, or get to a desktop.
> >>>>
> >>>>     I'm going to wait next iso.
> >>>>
> >>>>     
> >>>> https://drive.google.com/file/d/0B6QC6kfs4JvUU0FoLTM0dk56VVE/edit?usp=sharing
> >>>>
> >>>>     Thank you.
> >>>>
> >>>>     ---
> >>>>
> >>>>     Davide_01
> >>>>     http://www.linux-corner.it
> >>>>
> >>>>     Il 2014-03-16 23:42 Colin Close ha scritto:
> >>>>
> >>>>         Hi All
> >>>>         plymouth.enable=0 works for me too.
> >>>>         Plymouth is currently being updated
> >>>>         Best,
> >>>>         Colin
> >>>>
> >>>>         Colin Close
> >>>>         QA Team
> >>>>
> >>>>         On Sunday 16 Mar 2014 22:57:32 Tomasz Pawe? Gajc wrote:
> >>>>
> >>>>             Dnia niedziela, 16 marca 2014 22:30:48 luca pedrielli
> >>>>             pisze:
> >>>>
> >>>>                 >> Please do the tesing, and fill DETAILED
> >>>>                 bugreports on >> issues.openmandriva.org how can i
> >>>>                 provide a DETAILED bugreports? in debug mode
> >>>>                 messages scroll and i have no console access
> >>>>
> >>>>             In my case adding plymouth.enable=0 in boot parameters
> >>>>             does the trick and system boots Please try it
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>   
> >>>
> >>>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> 
> 


Reply via email to