Re: [omd-users] Where i can see incoming smmp Traps in OMD ?

[fireskyer]

 

 

Gesendet: Montag, 20. Februar 2017 um 10:38 Uhr
Von: firesk...@web.de
An: "Andreas Döhler" <andreas.doeh...@gmail.com>
Betreff: Re: [omd-users] Where i can see incoming smmp Traps in OMD ?

Hello Andreas

 

I've followed your advice to create an wildcard rule or at least i tried so...

 

My Rule has only one Condition:

 

Text to match.................................................................................................... : .*   Is that correct ?     Then i trigger my snnmp to test the Wildcard  Rule but nothing happens in the checkmk log but some other Traps from an Printer will be  logged fine.   My trap reciever which is the ireasoning browser tells me that the Trap is logged correctly and the Trigger works also... but not with checkmk.   This is my Snmp Trap which won't be processed in checkmk:   Source: 192.168.xxxx.xxx Timestamp: 603 hours 54 minutes 9 seconds SNMP Version: 1 Enterprise: .iso.org.dod.internet.private.enterprises.edsMain Specific: 6 Generic: enterpriseSpecific Variable Bindings: Name: .iso.org.dod.internet.private.enterprises.edsMain.dTrap.dTrapDeviceTable.dTrapDeviceEntry.dTrapDeviceIndex.4 Value: [Integer] 1         And this is my Trap from an printer which is logged in checkmk ( and no check is configured for this host in omd or checkmk) :   (no Service level)    192.168.xxx.xxx    all    1.3.6.1.4.1.683.6    Generic-Trap: 0, Specific-Trap: 0, Uptime: 8 sec           best regards john

 

Gesendet: Donnerstag, 16. Februar 2017 um 16:41 Uhr
Von: "Andreas Döhler" <andreas.doeh...@gmail.com>
An: firesk...@web.de, omd-users@lists.mathias-kettner.de
Betreff: Re: [omd-users] Where i can see incoming smmp Traps in OMD ?

If you are using the mkeventd with buildin snmptrapd then you need to build a catchall rule inside event console.

Only if there is a matching rule you will see anything. Without rule nothing is shown.

 

Best regards

Andreas
 

<firesk...@web.de> schrieb am Mi., 15. Feb. 2017 um 16:14 Uhr:

OMD Version: 2.11.20161004-labs-edition

 mkeventd (builtin: snmptrap)

 

Hello Guys 

 

Where i can see the incoming  Snmp Trap's in OMD ? .

 

In my rsyslog is no entry for it but the event console from check mk works and send some notification when the snmp  matches.

 

Then i thought maybe the reason is the rsyslog deamon from omd but thats not the problem. 

I tried both.. with rsyslog deamon on and off.

There is no entry for the snmp Trap in rsyslog.

 

best regards john 

 

 

 

 

_______________________________________________
omd-users mailing list
omd-users@lists.mathias-kettner.de
http://lists.mathias-kettner.de/mailman/listinfo/omd-users

_______________________________________________
omd-users mailing list
omd-users@lists.mathias-kettner.de
http://lists.mathias-kettner.de/mailman/listinfo/omd-users